自動避障減震小車的設計【含CAD圖紙、說明書】【三維SolidWorks】,含CAD圖紙、說明書,三維SolidWorks,自動,減震,小車,設計,cad,圖紙,說明書,仿單,三維,solidworks 摘 要 本次設計是對自動避障減震小車的設計。在這里主要包括:傳動系統的設計、臺架系統的設計、轉向系統的設計。這次畢業設計對設計工作的基本技能的訓練，提高了分析和解決工程技術問題的能力，并為進行一般機械的設計創造了一定條件。 整機結構主要由電動機產生動力通過聯軸器將需要的動力傳遞到傳動軸上，傳動軸帶動萬向節聯軸器，帶動輪子，從而帶動整機裝置運動，提高勞動生產率和生產自動化水平。更顯示其優越性，有著廣闊的發展前途。 本論文研究內容： (1) 自動避障減震小車的設計總體結構設計。 (2) 自動避障減震小車的設計工作性能分析。 (3)電動機的選擇。 (4) 自動避障減震小車的設計的傳動系統、執行部件及臺架設計。 (5)對設計零件進行設計計算分析和校核。 (6)運用計算機輔助設計，對設計的零件進行三維建模。 (7)繪制整機裝配圖及重要部件裝配圖和設計零件的零件圖。 關鍵詞：自動避障減震小車的設計， 聯軸器，避障減震 Abstract This design is to design the automatic obstacle avoidance damping trolley. Here mainly includes: transmission system design, platform design, steering system design. The graduation design on the design of the basic skills training, enhancing the analysis and to solve engineering problems, and create a certain condition for general mechanical design. The structure is mainly produced by the motor power through the coupling will need to transmit power to the drive shaft, the drive shaft drives a universal coupling, drive the wheels, so as to drive the device, improve labor productivity and automation level of production. But also show its superiority, there are broad prospects for the development. The research of this thesis: (1) the design of overall structure design of automatic obstacle avoidance damping trolley. (2) analysis and design work performance of automatic obstacle avoidance of car shock absorber. (3) the choice of motor. (4) transmission system, design of the executive component and bench design of automatic obstacle avoidance damping trolley. (5) the design of components for the design calculation and check. (6) the use of computer aided design, 3D modeling on Design of parts. (7) to draw the assembly drawing and parts assembly diagram and parts diagram design. Keywords: design, automatic obstacle avoidance damping trolley coupling damping, obstacle avoidance II 目 錄 摘 要 II Abstract III 目 錄 IV 1 緒論 1 1.1智能小車的意義和作用 1 1.2 研究目的及意義 1 1.3 國內外發展情況 2 2 自動避障減震小車的設計總體設計 4 2.1自動避障減震小車的組成 4 2.2方案選擇及論證 4 2.2.1 電機模塊 4 2.2.2 車架選擇 5 3 自動避障減震小車機械結構設計 6 3.1 步進電機選擇 6 3.1.1 計算輸出軸的轉矩 6 3.1.2 確定各軸傳動比 7 3.1.3 傳動裝置的運動和動力參數 7 3.2齒輪設計與計算 10 3.2.1 高速級齒輪設計與計算 10 3.2.2 低速級齒輪設計與計算 14 3.3 軸的設計與計算 18 3.3.1 輸入軸的設計與計算 18 3.3.2 中間軸的設計與計算 21 3.3.3 輸出軸的設計與計算 23 3.4 軸承的校核 26 3.4.1 輸入軸上軸承壽命計算 26 3.4.2 中間軸上軸承壽命計算 27 3.4.3 輸出軸上軸承壽命計算 28 3.5 鍵的選擇和校核 30 3.5.1 鍵的選擇 30 3.5.2 鍵的校核 30 3.6 機架的設計 30 3.6.1對機架結構的基本要求 30 3.6.2 機架的結構 32 3.6.3 橫梁設計 33 3.6.4 機架的基本尺寸的確定 34 4 自動避障減震小車的設計的三維虛擬展示 36 結 論 39 參考文獻 40 致 謝 41 4