變換齒輪箱體加工的工藝規程編制及夾具設計6含張CAD圖,變換,齒輪,箱體,加工,工藝,規程,編制,夾具,設計,cad 中英文資料 Manufacturing Technology 1.Corporate Reorganization Frenzy Because of the intense competitive pressure they experienced during the 1980s, American companies began implementing a wide range of initiatives in order to improve profitability, stem the loss of market share in established markets. These initiatives included statistical process control, just-in-time logistics, flexible manufacturing, cross-functional teaming, concurrent engineering, enterprise integration, flattened management, reinvesting the company, reengineering, quality function development, manufacturing resource planning, and so on. In addition to obvious cost-cutting measures—reducing the blue-and the white-collar work force, pressuring suppliers for lower prices, reducing the rate of wage increases, and installing new technologies to improve the efficiency of operations—companies have introduced a number of programs that are altering traditional managerial relationships. Three kinds of initiative are of particular importance for pushing companies toward agile business capabilities: · Distributing decision-making authority, often called employment · Enterprise integration · Concurrent operations Distributing decision-making authority to operational personnel, flattening the managerial hierarchy, creating an open internal information environment, increasing investing in continuous education and training for all personnel, and making customer service and sales everyone’s responsibility are correlated initiatives. Companies are learning that all these initiatives must be implemented, and in a coordinated way, if the impact of any of them is to be lasting. Over an 18-month period, Texas Instruments’ Defense Systems and Electronics Group moved from 26,000 employees, seven level of management, and $2 billion in revenues to 13,500 employees, every one of whom was in a cross-functional team, supervised by four levels of management while maintaining the same level of revenues and significantly improving earnings. After the merger of Asea and Brown Boveri, CEO Percy Barnevik fractured the combined companies into more than 1300 quasi-independent business units and 5000 profit centers. At the same time, he cut the combined headquarters staffs from 4000 to 200! Gould Precision Optics is a seven-employee, family-owned New York State business in which everyone is cross-trained in everyone else’ job, the company’s books are open to all for a monthly review and everyone has a clearly understood stake in the company’s competitiveness. The positive impact of teaming on a company’s organization and management is fully experienced only when teaming is made comprehensive across the company and coordinated with the delegation of decision-making to operational personnel and the flattening of the managerial hierarchy. Teams need to be cross-functional, have a common goal, and be supported by an open information environment and expanded education and training programs. The cost of information continues to decrease, and the value of information to productivity improvement, and as a product in its own right, continues to increase. It is hardly surprising, then, that companies are creating seamless information-exchange environments, internally and with suppliers and collaborators. Companies are discovering that integrating the functionally separated divisions of a company, and thereby overcoming the linear business processes that this separation encourages, pays big dividends. The size of the investments being made in multimedia hardware and software networking technologies make evident the vision that industry holds of its future. The goal is networks that make it possible for people who are distributed worldwide to work together on the same files with simultaneous real-time audio and “video-in-a-window” Macintosh, PC, and low-end workstations are offered, at very small price premiums, with microphones and video cameras built into the keyboard and monitor cases. Network speed and bandwidth are already a reality. 2. What is RP&M Manufacturing community is facing two important challenging tasks: (1)substantial reduction of product development time; and （2） improvement on flexibility for manufacturing small batch size products and a variety of types of products. Computer-aided design and manufacturing（CAD and CAM） have significantly improved the traditional production design and manufacturing. However, there are a number of obstacles in true integration of computer-aided design with computer-aided manufacturing for rapid development of new products. Although substantial research has been done in the past for computer-aided design and manufacturing integration, such as feature recognition, CNC programming and process planning, the gap between CAD and CAM remains unfilled in the following aspects: ·rapid creation of 3-D models and prototypes. ·cost-effective production of patterns and moulds with complex surfaces. To substantially shorten the time for developing patterns, moulds, and prototypes, some manufacturing enterprises have started to use rapid prototyping（RP）methods for complex patterns making and component prototyping. Over the past few years, a variety of new rapid manufacturing technologies, generally called Rapid Prototyping and Manufacturing（RP&M）, have emerged; the technologies developed include Stereolithography（SL）, Selective Laser Sintering（SLS）, Fused Deposition Modeling（FDM）, Laminated Object Manufacturing（LOM）, and Three Dimensional Printing（3-D Printing）. These technologies are capable of directly generating physical objects from CAD databases. They have a common important feature: the prototype part is produced by adding materials rather than removing materials, that is, a part is first modeled by a geometric modeler such as a solid modeler and then is mathematically sectioned（sliced）into a series of parallel cross-section pieces. For each piece, the curing or binding paths are generated. These curing or binding paths are directly used to instruct the machine for producing the part by solidifying or binding a line of material. After a layer is built, a new layer is built on the previous one in the same way. Thus , the model is built layer by layer from the bottom to top. In summary, the rapid prototyping activities consist of two parts: data preparation and model production. 3.The history of RP&M As usual with invention, one individual’s impatience was the prototyping industry, now barely a decade old. Its father, Charles W Hull, 58 , still works as vice chairman and chief technology officer at the RP company he helped found in 1986, 3D Systems of Valencia, Calif. As an engineer, Hull had always been bothered by the long time it took to make prototype models of plastic. They had to be machined by hand, he recalls. If more than one was needed, generally the case in industry, molds for making plastic prototypes had to be individually machined. The building blocks of a better system were lying around. Hull had been working for a small company that used ultraviolet lamps to substitute a laser for an ultraviolet lamp. “But taking that insight to a practical machine came slowly,” Hull recalls, and required several years of Edison-style inspiration. （In fact, a prototyping machine based on conventional UV light was developed in 1998 by The Institute of Advanced Manufacturing Technology, Xi’an Jiaotong University, China）. The results was the first prototyping machine, introduced by 3-D Systems in 1987. It could fabricate small, transparent plastic parts from CAD drawings in hours or at most days. The machine builds the model in layers, from the bottom up. A laser, which causes molecules of a photosensitive liquid resin to polymerize, scans above a vessel filled with the resin. The laser first traces the outline of a layer on the resin’s surface. Next, like an artist shading a panel in a pencil drawing, the beam crisscrosses the whole outlined area to harden it. Then the platform holding the model sinks so the layer is barely awash in liquid resin, the laser goes to work solidifying another layer atop it, and so on. When the translucent object is done, it is raised from the vat, dripping like a mermaid just emerged from the sea. Hull dubbed the process stereolithography, and it still dominates RP. The resins were, and still are very expensive: A gallon of acrylic blends of photo-curable liquids fetches about $750. But so great is industry’s hunger for prototypes, in an era when the pool of high-paid artisans who can make them by hand is shrinking and time to market is king, that designers were glad to get the first RP machines at any price. 3-D Systems has grown to an $80-million-a-year public company that’s still No.1 in the field by far. Before long other inventors jumped in. Michael Feygin, an immigrant Russian engineer, hit on the idea of building prototypes from inexpensive slices of paper. His company, Helisys of Torrance, Calif., makes remarkably sturdy objects by a process called laminated-object manufacturing（LOM）.A blue CO2 laser traces each layer by burning, moving like a crazed ice dancer carving a turn here, a straight line there. Successive layers are bonded by adhesive. Helisys, whose machines have modeled auto steering wheels, bumpers, and other shapes that feel like wood to the touch, is a 12-million-a-year public company. Meanwhile, a group of MIT inventors led by Emanuel Sachs, a slender, unassuming professor of mechanical engineering, chafed at the RP industry’s inability to make prototype, as well as molds and production parts, from ceramics and metal. The early RP machines could make a metal prototype only in a roundabout way. First a plastic model had to be “invested”, or clad in a heat-resistant material such as a ceramic. Then the model was “sacrificed” by melting, just as the ancient Egyptians melted a wax model inside a mold to clear the way for a bronze casting. This leaves a mold suitable for making a metal or plastic prototype. Why not skip that stage, Sachs asked, and make sturdy parts directly from CAD designs? He and his 30-person shop at MIT have become the leaders in a branch of RP based on the same technique enabling computer printers to produce documents by squirting ink through jets. Instead of ink, MIT’s RP machines squirt a binder on layers of powdered steel, ceramics, or even starch that are spread by rollers. The machines to which Sachs’ idea has given birth, called 3-D printers, are fairly inexpensive by RP standards, with low-end versions in the $50,000 range. The bigger 3-D printers are only now realizing Sachs’ goal of making commercially usable metal objects and molds directly from CAD designs. Soligen, a Northridge, California, company founded in 1992 by expatriate Israeli engineer Yehoram Uzirl, has developed, under license from MIT, the ink-jet machine Specific Surface employed to make those ceramic filters. On its machines, Soligen also makes ceramic molds, directly from CAD drawings, suitable for casting metal automotive parts that are as strong as those used in commercial products and suitable for testing and small production runs. Soligen’s process still has limitations. The ceramic molds are made in one piece and can only be used once, since they must be destroyed to get at the part. But Soligen can make lots of molds quickly as needed. Many RP users, eager to go further, want rapidly made molds that can be used over and over for mass production. That would shrink the manufacturing middle some more, bypassing a conventional process in which a long-lasting mold is carefully carved out of a block of high-grade steel with CNC and other machines, then painstakingly finished by hand, a process that can take months. Quickly made reusable molds, which put RP squarely in rapid-manufacturing territory, have started to appear. When Rubbermaid Office Products of Maryville, Tenn., got an urgent order in 1996 from Staples, the office-products chain, for a small plastic stand that holds sheets of paper vertically, Rubbermaid went to an RP service bureau in Dallas that had a machine made by DTM of Austin, Texas. The ten-year-old company, whose initials stand for “desk top manufacturing,” has developed a sintering process in which loosely compacted plastic are heated by a laser to combine with powdered steel, layer after layer, into a solid mass. The DTM machine speedily produced a metal mold from which Rubbermaid was able to make more than 30,000 plastic stands for staples, priced at $3. Says Geoff Smith-Moritz, editor of the newsletter Rapid Prototyping Report in San Didgo:“Though not very impressive looking, this product is a pioneer. More and more molds are being made this way.” In its purest form, rapid manufacturing would eliminate molds: Machines would fabricate products directly from CAD designs. Extrude Hone, a company in Irwin, Pa., is getting ready to market a machine, based on MIT’s ink-jet technology, that will make not only metal molds but also salable metal parts. In Extrude Hone’s machine, powdered steel is hardened with a binder and infiltrated with bronze powder to create a material that is 100% metal. Powerful new laser may also open doors to direct manufacturing. Such laser systems are being explored at national laboratories such as Sandia and Los Alamos, as well as at the University of Michigan, Penn State, and elsewhere. They may soon be available commercially. In the Sandia system, a 1,000-watt neodymium YAG（yttrium-aluminum-gallium）laser melts powdered materials such as stainless and tool steels, magnetic alloys, nickel-based superalloys, titanium, and tungsten in layers to produce the final part. The process is slow: three hours to make a one-cubic-inch object. But the part is just as metallically dense as one made by conventional means. Sandia vic president Robert J. Eagan says the lab’s researchers hope to see the process used to make replacement parts for the military’s stored nuclear weapons. Commercial interest is high too. Ten companies, including AlliedSignal and Lockheed Martin, are participating in the program. Another 20 companies support research at Penn State, where the goal is to make big objects, such as tank turrets and portions of airplanes, as a single part. Some experts look to a manufacturing future extensively liberated from today’s noisy, hot routines. Instead of molds and machine tools, these visionaries foresee rows of lasers building parts, 3-D printers fashioning convoluted shaped no CNC machine can carve, and silent ceramic partsmakers replacing the traditional noisy factory din. Many products turned out in future factories could be designed to take advantage of rapid-manufacturing techniques. Implantable drug-release devices, with medicine sealed in, could be made in a single operation, since 3-D printers can make a sandwich-like product. Manufacturing pioneers find such possibilities intoxicating.“We could have naval ships carry not an inventory of parts but their images digitized on a 3.5-inch diskette, plus a bag of powdered metal and a rapid manufacturing machine,”says 3-M’s Marge Hartfel.Adds Brock Hinzmann, director of technology assessment at SRI International:“In two or three years rapid manufacturing will be on everybody’s lips.”In the meantime, the feats of fast prototyping are giving the factory folks plenty to talk about. 4. Current application areas of RP&M Although RP&M technologies are still at their early stage, a large number of industrial companies such as Texas Instruments, Inc., Chrysler Corporation, Amp Inc. and Ford Motor Co. have benefited from applying the technologies to improve their product development in the following three aspects. （1）Design engineering 1)Visualization. Conceptual models are very important in product design. Designers use CAD to generate computer representations of their design concepts. However, no matter how well engineers can interpret blue prints and how excellent CAD images of complex objects are, it is still very difficult to visualize exactly what the actual complex products will look like. Some errors may still escape from the review of engineers and designers. The touch of the physical objects can reveal unanticipated problems and sometimes spark a better design. With RP&M, the prototype of a complex part can be built in short time, therefore engineers can evaluate a design very quickly. 2)Verification and optimization. Improving product quality is always a important issue of manufacturing. With the traditional method, developing of prototypes to validate or optimize a design is often time consuming and costly. In contrast, an RP&M prototype can be produced quickly without substantial tooling and labor cost. Consequently, the verification of design concepts becomes simple: the product quality can be improved within the limited time frame and with affordable cost. 3)Iteration. Just like the automotive industry, manufacturers often put new product models into market. With RPA&M technology, it is possible to go through multiple design iterations within a short time and substantially reduce the model development time. 先進制造技術 1、瘋狂的公司重組 由于在二十世紀80年代他們經歷了強烈的競爭壓力，為了提高利潤率，阻止市場份額損失，美國公司開始在已建立的市場上實施大范圍的創新。 這些創新包括統計程序控制，及時的后勤學，靈活的制造業，交叉功能合作，一致的工程學，企業的整合，有序的管理，再投資公司，改建，質量功能的開發，制造業資源計劃，等等。 除明顯的消減成本的措施之外——減少藍色和白領力量，迫使供應商降低價格，減少工資的增長率和安裝新技術目的是為了提高業務運營的有效性——公司已經引進了修改傳統管理關系的一定數量的程序。 三種類型的創新對于推動公司朝著敏捷企業能力的方向發展是特別重要的： · 分布的政策制定權威，經常稱作就業 · 企業的整合 · 同時的業務運營 對操作人員來說分布的政策制定權威，可以使管理階層變得有序，并且能夠創造一個開放的內部信息環境，在連續的教育和訓練下為所有人員增加投資，并且使做顧客服務和銷售變成每一個人的責任，這就是相互有聯系的創新。公司獲悉如果他們中的任何一個的沖擊是持久的，那么他們就必須使用一種協調的方式來實施所有這些創新。 在18個月的期間里，德洲儀器防御系統和電子小組從26,000雇員，及七成的管理水平和二十億美元的收入中轉變成了13,500名雇員，并且他們中的每一個人都是這具有交叉架功能團隊中的一員，當維護同樣水平的收支和極大地改進收入時，由四成水平的管理人員進行監督。 在瑞典通用電氣公司和法瑞公司合并之后， Percy Barnevik這位首席執行官打破了公司間的超過1300個類似獨立營業單位和5000個利潤中心的這種聯系。 同時，他將聯合的總部職員從4000減少了到200! 有精確光學的古爾德人占七成雇員，他們的家族擁有紐約州事務，這些事物對每個人來說都要在所有的其他別的工作崗位上被訓練，公司的書對所有的每個月的回顧及檢查都是開放的，并且大家清楚地了解在公司的競爭性中的獎金。 只有當合作成為全面橫跨公司，并且對操作人員和有序的管理階層來說，能夠協調以制定政策的代表團時，合作對公司的組織和管理的積極影響才能被充分地體驗。 團隊需要互補功能，需要有一個共同的目標，一個開放的信息環境和擴大的教育及訓練節目的支持。 信息的成本繼續在下降，隨之，作為本身就是一種產品的信息，隨著生產率的提高它的價值卻繼續地增加。這幾乎一點都不驚奇，然后，公司將在內部和在供應商與合作者之間創造出無縫信息交換環境。公司正在發現整合那些在功能上相互獨立的一個公司的各個部門，并且從而克服這種鼓勵分離的線性業務流程，進而支付大股息。 在多媒體硬件和軟件網絡技術中投資額的大小已經形成了，并且使公司的這種在未來產業中形成的愿景變得很明顯。目標就是使網絡成為可能：隨著話筒和攝像機被裝入鍵盤和顯示器盒，則那些分布在全世界的人們可以同時打開一個文件并且可以進行同時實時音頻，及“在窗口錄影” Macintosh，個人計算機和以非常小的價格保險費提供低終端的工作站。 網絡速度和帶寬已經成為了現實。 2、RP&M是什么了呢？ 制造業團體面臨著兩項重要的富有挑戰性的任務： (1) 大量的減少了產品的開發時間； (2)提高了制造小批量產品和各種各樣類型的產品的制造業的靈活性。 計算機輔助設計和制造業(CAD和CAM)顯著改進了傳統生產設計和制造業。然而，為新產品的迅速發展，對于確切地整合計算機輔助設計與計算機輔助生產，有許多的障礙。盡管在過去對計算機輔助設計和制造業整合進行了大量的研究，例如特征識別，CNC編程和處理計劃，CAD和CAM之間的空白在以下方面依然是未填充： ·三維模型和原型的迅速創作。 ·有復雜表面的樣式和模子的有效成本的生產。 極大地縮短了為開發樣式，模具和原型的時間，一些制造業企業開始使用快速的原型機制造方法用于制作復雜的樣式做和原型機制造組件。在過去幾年里，各種各樣的新的快速的制造業技術，一般被稱作快速原型制造和制造業（RP&M）已經形成了；被開發的技術包括立體平版印刷術(SL)，有選擇性的激光焊接(SLS)，被熔化的沉積物塑造(FDM)，分層物體的制造業(LOM)和三維空間打印(三維打印)。這些技術具有直接地從CAD數據庫中生成實體的能力。他們有一個共同的重要特點：原型機零件是通過增加材料而不是取消材料來生產的，即，零件首先要被制成幾何學的模型，然后被劃分成(切成)一系列的平行的短剖面片斷。對于每個片斷，都要就行紅外線固化或是裝訂路徑。這些紅外線固化或裝訂路徑通過凝固或是綁定一系列的材料直接地被用來指導生產零部件的機器。在層數被建立之后，新的層數將會以相同的方式早先被建立。 因此，模型是被從底部到頂端一層一層地建立?？傊?，快速的原型機制作活動包括兩部分：數據準備和模型生產。 3、快速原型制造和制造業（RP&M）的歷史 像平常一樣的發明，一個人的不耐煩是原型制造產業，現在僅僅十年的樣子。其父親，查爾斯瓦特赫爾，58歲，仍是工程副委員長和技術總監，在1986年幫助他發現了RP公司，加利福尼亞3D巴倫西亞系統。 作為工程師，赫爾很懊惱因為他花了很長時間用塑料來制作原型機的模型。他們必須親自加工，他回憶說。 如果有一個以上的需要，一般情況下在企業里的情況是，做塑料原型的模子必須單獨地用機器制造。 在四周矗立一個更好的系統的建筑群。赫爾一直致力于為一家小公司而工作，這家小公司過去常常使用紫外光燈替代紫外激光燈。“但是這種做法對于了解一個實用機器變得很緩慢，”赫爾回憶道，并且需要幾年愛迪生式的啟發。(實際上，在1998年基于常規紫外光的原型制造機已經形成了，這是由中國西安交通大學先進的制造業技術研究院主導的。) 結果是第一個原型制造機器，在1987年引進了三維系統。 它可以示在幾小時或好幾天的時間里用CAD畫圖，制造出小的、透明的塑料部分。機器在層上建立模型，從下到上。激光，可以造成光敏液體樹脂分子聚合，并且在充滿樹脂的容器之上掃描。 接著，它可以像一個藝術家一樣用素描在面板上留下底紋，射線在整個大致的區域交叉往來以使它硬化。然后讓這個平臺將模型沉下去，因此有著層數的平臺是幾乎不可能充滿液體樹脂的，激光繼續起作用在它上面去另一層工變硬，等等。當半透亮的物體形成時，水滴就像是從海底涌現出來的美人魚一樣。 赫爾復制了立體平版印刷術的過程，并且它仍然控制著RP。樹脂仍然是非常昂貴的：一加侖的丙烯酸酯用可醫治的液體的混合可售得大約750美元。但更重要的是企業對原型制造機的渴求，在這樣一個時代里，有著大量的高薪酬的能工巧匠們正在減少，上市的時間是很寶貴，設計師們很高興得到第一個RP機器的以所有價格。 三維系統已經成長為每年都有八千萬股票