喜歡這個資料需要的話就充值下載吧。。。資源目錄里展示的全都有預覽可以查看的噢，，下載就有,,請放心下載，原稿可自行編輯修改=【QQ：11970985 可咨詢交流】====================喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改=【QQ：197216396 可咨詢交流】====================
目 錄
摘要 I
Abstract II
1緒論 1
1.1落葉清掃機設計的目的和意義 1
1.2本課題應解決的主要問題及技術要求 1
1.3國內清掃機的發展概況 2
1.4國外落葉清掃機的研究現狀 4
2總體方案選擇 5
3落葉清掃機運動機構的設計 10
3.1連桿機構的設計 10
3.2落葉清掃車擠壓機構運動分析與設計計算 11
3.3齒輪與輪軸的設計 14
4落葉清掃機帶傳動的設計計算 25
4.1平帶傳動機構的設計及計算 25
4.2V帶傳動機構的設計及計算 28
4.3帶傳動的張緊裝置 31
5總結 32
參考文獻 33
致 謝 34
機電工程學院本科畢業設計（論文）
落葉清掃機設計
摘要
目前，城市街道、公園、道路落葉清掃大多用手工清掃，效率低、勞動強度大，且不利于落葉的二次利用。本設計力求在落葉清掃過程中實現機械化，采用氣吸方式收集落葉以利于路旁、樹叢下落葉收集。收集后的落葉，采用加熱軟化和機械強力擠壓的方法，把松散的落葉加工成固體塊狀以利于運輸儲存及二次利用。本設計采用帶孔的旋轉落葉機構解決了落葉粘附落葉網的問題，采用機械及液壓的方式，提高了擠壓的壓力與作業效率。本設計對各個機構進行了精確的運動分析與計算，解決了機構運動的配合與定時問題。本設計基本上實現了落葉收集的自動化，在城市環衛應用上可能將有廣闊的應用前景。
關鍵詞：落葉清除；加熱軟化；強力擠壓；氣吸方式；
The Design Of Shatter Sweeper
Abstract
Nowadays, the cleaning of the shatter in the street and park is usually done by labors. The workload is large .It will cost a lot of time and the leaf collected will not be used at the second time. The design is pursuit to improve the process did by machine. It will use the gas to collect the shatter which hides under the trees and the roadsides .After that, the leaves collected will be heated to be soft and be extruded by the machine. At the end, the shatter will be machined to solid so that it will be used and transported more conveniently. In fact, the machine usually works with many problems because the shatter perhaps adheres to the net .In order to solve this problem, we design the rotating institution to improve the pressure and efficiency. During the designing, we did a lot of analysis and calculation, making the machine work by cooperation and it can be timing. We have reason to believe, under our effort, the machine we designed will have fantastic performance.
Keyword: deciduous cleared ; heating softening;powerful extrusion ; gas suction mode;
2