喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:1064457796 或 1304139763】
中北大學分校畢業設計
洗滌劑瓶彈簧固定管塑料注射成型模具設計
中英文摘要
摘要：本設計的對象是一個洗滌劑瓶彈簧固定管的塑料注射模具。設計中塑料制品的結構有外螺紋、加強筋等，本身為薄壁長圓筒塑料件。根據其塑料件的結構特點以及聚丙烯塑料的性能，設計中外螺紋處應用了哈呋結構。兩邊大中間小的特征使得型芯須用雙型芯在塑件中小尺寸位置的配合。脫模機構中由于制件外形呈階梯狀，不能用一級頂出機構完全脫模。用二級頂出機構時塑料件在第二次頂出后塑件的螺紋段后會被卡在型腔中，所以二級頂出也不是一個好的方案。用哈呋結構加上推板的脫模裝置可以解決以上問題，能讓塑件完全自動脫模，為一個可行性較好的方案。此設計就是根據這個方案及聚丙烯的性質設計模具的各部分結構。
關鍵詞： 聚丙烯 注塑模具 型芯 模具型腔 薄壁的
Abstract: The object of this design is an injection mould which is used in molding the pipe fixed spring of scour bottle. The design of the construction of plastic product contains screw outside , ribs...etc .It oneself is lengthways for the thin wall the piece of cylinder too long .According to the construction characteristics of the plastic product and the performance of the Polypropylene ,in the design of screw outside applied the huff construction .The bigger in the center and small characteristic in both sides makes must be use the double core construction in injection mould to fit of the baby size site .Because of The pattern draw mrvhsnidm inside represent the stairs form , the incapability uses a the order vertex or a Second class of vertex can’t let the plastic product broken off itself. Complete pattern draw in mrvhsnidm .Out the mrvhsnidm hour plastic product with the second class vertex in second a vertex post - the thread a future reunion of the plastic product stick in the mold cavity, so the second class of vertex is not also a good project .Add to push with the huff construction and mandrill can pattern draw apparatus to resolve the above problem . It can let over and full-automatic pattern draw in plastic product, for good project in a feasibility.This design be according to each parts of constructions of the property design molding tool between this project and polypropylene .So it’s a reasonable select and a feasibility is strongly project.
Keywords: polypropylene injection mould core mold cavity thin-wall
- 2 -