槳葉結構的設計[中文1880字] 【中英文WORD】,中文1880字,中英文WORD,槳葉結構的設計[中文1880字],【中英文WORD】,槳葉,結構,設計,中文,1880,中英文,WORD The Design Of The Lade Blade structure design of the main work is according to the overall design and aerodynamic design and the parameters of the helicopter, helicopter is designed to meet tactical technical requirements and overall technical requirements of blade structure. Blade structure design to meet the blade aerodynamic shape, rotor dynamics, fatigue and strength, reliability and maintainability, manufacturability and economy requirements, etc. Blade structure design of main work include: (1) The blade material design, select material determine blade materials system and variety. (2) The blade configuration design, determine the structure of the blade profile typical forms, joint form and main structure size. (3) Blade layer design and structure parameters are calculated. (4) The blade structure detail design. Blade of the main girder, skin structure, after a period of parts and connectors. In addition, there is blade tip cover, rear adjustment piece, front bag piece, balance weight, etc. Blade configurations by early wood blade, blade hybrid structure, the metal blade, metal and composite materials mixed blade structure and development of the whole composite blade, to date, most advanced helicopter blades with composite materials. Blade configuration is mainly according to the shape of the blade material and supporting as well as the joint form to differentiate, blade configuration design, want to consider domestic blade development and industry technical accumulation, the basis of reasonable selection of blade configurations. 1. The metal blade configurations Metal blades are usually made of girder, joint, in the back cover and the blade tip, trailing edge adjustment piece, front bag piece, such as balance weight zero components. According to the shape of the girder and the forming process is different, can be divided into the hollow extruded beam blade, C shape extruded beam blade, illustrated the paddle blade and a closed cavity composite beams. (1) Extrusion hollow beam Extrusion hollow girder according to blade design requirements, the girder extrusion into D beam, can be squeezed into trapezoidal beam. Usually the shape of the hollow beam by mechanical processing and become, form the front of the oar Ye Yi type. The configuration of the blade good torsional stiffness, beam can be individually under complex load of blade. Hollow beam are usually made of aluminium alloy extrusion forming, inner surface son what shape and surface quality of the girder by extrusion technology guarantee, usually inner surface and girder as the surface processing benchmark. Therefore, extruded beam inner cavity size and high surface quality requirement, manufacture process is difficult. (2) C shape extruded beam girder (C) C girder is generally made by aluminum alloy extrusion forming, surface after machining. C beam form at the front part of the airfoil, upper and lower surface constitute a part of the airfoil surface. C beam inner surface is open (concave), surface processing and quality inspection. Because C beam rear openings, low torsional rigidity of girder, often need to skin (or shape wall) or Ⅱ girder together constitute a single or double closed cavity closed load-carrying structure. (3) Illustrated the blade Illustrated by alloy steel or commonly qin alloy extrusion forming, cross section shape according to the requirements of blade overall configuration and the bearing can be round or oval. Steel of high strength, modulus, impact toughness is better, but better than strength, modulus and aluminum alloy. (4) Other forms More closed cavity composite beam is composed of steel plate bending forming C shape, D beam element, by welding or bonding of closed cavity load-carrying structure. Girder for stainless steel plate after forming glue connect together to form more closed cavity beam. 2. Composite blade configurations Composite blade configuration mainly based on the typical section girder structure, mainly including c girder single closed cavity, D beam double closed cavity structure with more closed cavity, etc. (1) C girder single closed cavity structure Is usually the most simple profile structure C shape beam single closed cavity structure, the structure is simple and good manufacturability. This configuration is similar to metal C shape beam structure, because it is open at the back of the C shape beam structure, section low torsional rigidity, for blade chord length is larger, after airfoil section area skin and bonding strength of filling material is the structure design of the difficulty, so this kind of configuration is usually suitable for medium and small helicopter blades. (2) D beam double closed cavity structure Single closed cavity structure stiffness and strength is relatively low, for blade chord length is larger, followed by regional skin and filler material knot strength to demand higher, can use double closed cavity structure. Double closed cavity D C beam girder structure is relatively single closed cavity structure is relatively complex, but this kind of structure can improve the torsional rigidity of blade and the blade trailing edge skin it strength. (3) closed cavity structure C beam and girder D configuration, essence is the metal blade configuration, only the metal blade hollow beam and solid beam with composite material instead. And more closed cavity structure, make full use of the composite materials can design, make the inside of the blade structure design, performance optimization, the stiffness, weight and strength characteristics better. More closed cavity girders of the blade is a kind of multi-channel structure of force transmission, due to more closed cavity structure, internal blade by hardwood, such as beam, Z girder,Ⅰ girder, Ⅱ girder, blade broken good security features. 3. The blade joint form Joint is the key component of blade connected to the propeller yi, blade root larger centrifugal force and under complex load are passed on from joint to oar yi. Blade joint depends primarily on connection with OARS yi in the form of form. Usually have a comb joint, flange and double winding bushing connecting forms, etc. (1) comb joint connection Comb joint connection generally adopts double ear or ears more connection, connection of the bolt hole, there are two of the same diameter, also have different sizes. Use comb connector, connector connected to the girders usually adopts bolt connection and bonding layer board, joint with girder web plate up and down the roots by bolt connection into a whole. Web thickness along the exhibition to become thinner, step by step implementation structure and strength design. (2) the flange connection Blade flange with OARS oar yi flange through a set of bolts connection, connection and girders connection bolt connection and bonding layer board, is often used to this kind of connection mode for more metal blades, straight type 8 main blade is made the connection form of the flange. (3) dual coil sleeve connection Blade roots of the two bushings through the bolt or pin connected to the propeller yi, this type of connection for composite blade, blade beam around the roots of bushing, joint is relatively simple. At present, the development of 9 straight, straight 11 composite blade is with double sleeve connection mode. 槳葉結構的設計 槳葉結構設計的主要工作是根據直升機總體設計和氣動設計確定的參數，設計出滿足戰術技術要求和直升機總體技術要求的槳葉結構。槳葉結構設計要滿足槳葉氣動外形、旋翼動力學、疲勞與強度、可靠性與維修性、工藝性、經濟性等要求。 槳葉結構設計主要工作包括: （1）槳葉的選材設計，確定槳葉所用材料體系和品種。 （2）槳葉的構型設計，確定槳葉典型剖面的構造形式、接頭形式和主要結構尺寸。 （3）槳葉鋪層設計和結構參數計算。 （4）槳葉結構細節設計。 槳葉的主要結構有大梁、蒙皮、后段件和接頭。此外，還有槳尖罩、后緣調整片、前緣包片、平衡配重等。槳葉構型由早期的木質槳葉、混合式結構槳葉，向金屬槳葉、金屬和復合材料混雜結構槳葉和全復合材料槳葉發展，目前先進的直升機大多采用復合材料槳葉。槳葉的構型主要根據槳葉材料與大梁的形狀以及接頭形式來區分，進行槳葉構型設計時，要考慮國內槳葉研制的基礎和行業的技術積累，合理選擇槳葉的構型。 1.金屬槳葉構型 金屬槳葉通常由大梁、接頭、后段件及槳尖罩、后緣調整片、前緣包片、平衡配重等零組件組成。根據大梁的形狀和成形工藝不同，可分為空心擠壓梁槳葉，C形擠壓梁槳葉，管梁槳葉和多閉腔組合梁槳葉。 （1）空心擠壓梁 空心擠壓大梁可根據槳葉設計要求，將大梁擠壓成D形梁，也可擠壓成梯形梁。通?？招牧旱耐庑谓?jīng)機械加工而成，構成槳葉翼型的前部。這種構型的槳葉抗扭剛度好，大梁可以單獨承受槳葉的復雜載荷?？招牧和ǔＳ射X合金擠壓成形，大梁內表面兒何形狀與表面質量由擠壓工藝保證，通常大梁內表面又作為外表面的加工基準。因此，擠壓梁內腔尺寸和表面質量要求較高，工藝制造難度較大。 （2）C形擠壓梁(C形梁) C形梁一般也是由鋁合金擠壓成形，表面經機械加工而成。C形梁構成翼型的前緣部分，上下表面構成部分翼型面。C形梁內表面(凹面)是開敞的，便于表面加工和質量檢查。由于C形梁后緣開口，大梁的扭轉剛度偏低，常需要與蒙皮(或外形壁板)或Ⅱ形梁一起構成單閉腔或雙閉腔承力結構。 （3）管梁槳葉 管梁一般由合金鋼或欽合金擠壓成形，截面形狀根據槳葉整體構型和承力的要求，可以是圓形或橢圓形。鋼的強度高，模量、沖擊韌性比較好，但比強度、比模量與鋁合金不相上下。 （4）其他形式 多閉腔組合梁是由鋼板折彎成形的C形、D形梁元件，通過焊接或膠接組成的多閉腔承力結構。大梁為不銹鋼板彎曲成形后膠接在一起組成多閉腔梁。 2.復合材料槳葉構型 復合材料槳葉構型主要依據大梁典型剖面結構形式區分，主要包括c形梁單閉腔、D形梁雙閉腔與多閉腔等結構形式。 （1）C形梁單閉腔結構 通常最簡單的剖面構造是C形梁單閉腔結構，該結構簡單，工藝性好。這種構型類似金屬C形梁結構，由于采用后部開口的C形梁結構，剖面抗扭剛度低，對于弦長較大的槳葉，翼型后段區蒙皮與填充材料的膠接強度是這種結構的設計難點，所以這種構型通常適用于中、小型直升機的槳葉。 （2）D形梁雙閉腔結構 單閉腔結構的剛度與強度相對較低，對于弦長較大的槳葉，其后段區域蒙皮和填充材料的就結強度要求較高，可采用雙閉腔結構。雙閉腔D形梁結構較單閉腔C形梁結構相對復雜，但這種結構能提高槳葉的扭轉剛度和槳葉后緣蒙皮的就結強度。 （3）多閉腔結構 C形梁和D形梁構型，實質是金屬槳葉的構型思路，只是將金屬槳葉的空心梁和實心梁用復合材料代替。而多閉腔結構，充分利用了復合材料的可設計性，使槳葉內部的結構設計效能趨于優化，其剛度、重量和強度特性更優。多閉腔大梁的槳葉是一種多路傳力結構，由于采取多閉腔結構，槳葉內部有加強梁，如Z形梁、Ⅰ形梁、Ⅱ形梁等，槳葉破損安全特性好。 3.槳葉接頭形式 接頭是槳葉與槳毅連接的關鍵構件，槳葉根部承受較大的離心力和復雜載荷都由接頭傳遞給槳毅。槳葉接頭的形式主要取決于與槳毅的連接形式。通常有梳形接頭、法蘭盤和雙纏繞襯套連接形式等。 （1）梳形接頭連接 梳形接頭連接一般采用雙耳或多耳連接，連接的螺栓孔，有兩個相同直徑的，也有大小不同的。采用梳形接頭，接頭與大梁的連接通常采用螺栓連接和層板膠接，接頭上下腹板與大梁根部通過螺栓連接成一個整體。腹板的厚度沿展向逐級變薄，實現結構的等強度設計。 （2）法蘭盤連接 槳葉法蘭盤與槳毅的法蘭盤通過一組螺栓螺帽連接，接頭與大梁的連接常采用螺栓連接和層板膠接，這種連接方式多用于金屬槳葉，直8型機主槳葉就是采用這種法蘭盤的連接形式。 （3）雙纏繞襯套連接 槳葉根部的兩個襯套通過螺栓或插銷與槳毅相連，這種連接形式多用于復合材料槳葉，槳葉大梁繞根部襯套纏繞，接頭相對簡單。目前我國研制的直9、直11復合材料槳葉都是采用雙襯套的連接方式。 8