喜歡這套資料就充值下載吧。資源目錄里展示的都可在線預覽哦。下載后都有，請放心下載，文件全都包含在內，有疑問咨詢QQ:414951605 或 1304139763 江西農業大學工學院本科畢業設計 摘 要 目前，混泥土攪拌機在國內外都有著飛速的發展，國際競爭力在不斷提高。 為了滿足市場需求，完善產品系列，適應小型建筑施工和實驗室工作的需求，設 計了此混泥土攪拌機。 本課題主要研究立軸式混泥土攪拌機的工作原理以及攪拌機攪拌系統方案設計。根據設計要求，對混泥土攪拌機的攪拌系統初步定型，并對攪拌系統的主要部件進行設計和計算。主要設計結論如下： （1）攪拌機的結構方案分析與總體設計 本攪拌機的結構是由機架、攪拌裝置、傳動系統所主成。 機架是整個設備的支撐部分，由槽鋼和鋼管焊接而成。攪拌裝置由攪拌筒、攪拌軸、攪拌鏟片所主成，攪拌鏟片固定在攪拌臂上，并且與攪拌軸主成一體，攪拌鏟與攪拌筒底間隙可微量調整。傳動系統由電動機、減速器、帶傳動、鏈傳動所組成。 （2）攪拌裝置的設計 攪拌裝置是安裝在軸套上的鏟片式葉片，葉片隨軸的旋轉而轉動，對筒內物料進行攪拌，是物料混合均勻，攪拌臂向上伸出，可起到攪拌上方物料的作用。 （3）傳動系統的設計 傳動系統是由V帶傳動和鏈傳動來傳遞運動的。電動機輸出轉速通過V帶傳動傳遞到減速器，減速器又通過鏈傳動將轉速傳遞給攪拌機的主軸，主軸帶動軸套轉動，從而使攪拌葉片旋轉，來完成攪拌的工作。 關鍵詞：攪拌機；立軸；混泥土 Ⅰ Abstract At present, concrete mixer at home and abroad have a rapid development, international competitiveness in the continuous high. In order to meet market demands, improving the product series, adapt to the small building construction and laboratory work demand, design the concrete mixer. This topic research vertical shaft type concrete mixer work principle and blender mixing system design. According to the requirements of the design of concrete mixer, the mixing system, and the preliminary finalize the design of the main parts by mixing system design and calculation. The main conclusions are as follows: (1)mixer with the overall structural design of program analysis The structure is a rack mixer, mixing equipment, drive into the main. The support of the entire equipment rack is part of the channel steel and steel pipe welded. Mixing device consists of the mixing tube, shaft, mixing shovel into a film by Lord Spatula piece fixed to the mixing arm, and with the main shaft into one, Spatula and mixing tube at the end of the gap can be micro-adjusted. Transmission from the motor, gearbox, belt drive, chain drive of the composition. (2) mixing device design Mixing device is installed in the sleeve piece on the shovel blade, blade rotation with the axis of rotation of the barrel for mixing the material, the material is mixed, stirring arm extended upward, may play a role in mixing the material above. (3) transmission system design Transmission by V belt drive and chain drive to transfer movement. Motor output speed to pass through the V-belt transmission to the gearbox, gearbox and chain drive to speed to pass through to the mixer spindle drive shaft rotation, so that the mixing blades rotating, stirring to complete the work. 朗讀 顯示對應的拉丁字符的拼音 字典 Keywords Mixer Vertical axis Concrete Ⅱ 目 錄 1 總體概述 1 1.1畢業設計課題 1 1.2 設計的總體要求 1 1.3 設計大綱 1 1.3.1 設計原則 1 1.3.2 原始數據 1 1.4泥土攪拌機的概述 1 2、設計的主要內容 2 2.1攪拌裝置的設計 2 2.2傳動裝置的設計 2 2.3機座與支架的設計 3 2.4電器控制系統的設計 3 3、主要機構具體結構設計及參數設計 3 3.1攪拌裝置的設計 3 3.1.1攪拌桶的設計 3 3.1.2攪拌葉片的設計 4 3.2傳動裝置的設計 6 3.2.1電動機的選擇 6 3.2.2電動機的選擇 8 3.2.3軸的設計計算 15 3.2.4滾動軸承的選擇及計算 24 3.2.5鍵聯接的選擇及計算 26 3.2.6減速器附件的選擇 27 3.2.7潤滑與密封 27 3.3機座與支架的設計 27 3.4電器控制系統的設計 28 4、參考文獻 29