汽車防抱死制動系統的控制方法仿真研究
汽車防抱死制動系統的控制方法仿真研究,汽車,抱死,制動,系統,控制,節制,方法,法子,仿真,研究,鉆研
編號
無錫太湖學院
畢業設計(論文)
相關資料
題目: 汽車防抱死制動系統的控制方法
仿真研究
信機 系 機械工程及自動化專業
學 號: 0923084
學生姓名: 蔣 耀
指導教師: 陳炎冬(職稱:講師 )
(職稱: )
2013年5月25日
目 錄
一、畢業設計(論文)開題報告
二、畢業設計(論文)外文資料翻譯及原文
三、學生“畢業論文(論文)計劃、進度、檢查及落實表”
四、實習鑒定表
無錫太湖學院
畢業設計(論文)
開題報告
題目: 汽車防抱死制動系統的控制方法
仿真研究
信機 系 機械工程及自動化 專業
學 號: 0923084
學生姓名: 蔣 耀
指導教師: 陳炎冬 (職稱:講師 )
(職稱: )
2012年11月28日
課題來源
生活實踐
科學依據(包括課題的科學意義;國內外研究概況、水平和發展趨勢;應用前景等)
(1)課題科學意義
通過對本專業相關知識的學習以及通過對課內外科技學術的了解,我們知道,隨著科學技術的飛速發展,汽車制造和設計者將智能化與信息化技術融入汽車安全控制系統中,人們對汽車的安全操控性能要求也越來越高,都在運用現代科技及大量的人力物力為汽車安全駕駛開發先進裝置,使得汽車制造向更加安全、舒適,更加人性化方向發展.而作為汽車安全駕駛的重要裝置—— ABS(制動防抱死裝置) ,極大地提高了汽車在各種路面緊急制動的安全性,并且在此基礎上又開發出了ASR(驅動防滑轉控制系統) 、EBS(電子控制制動系統)等技術.這些新技術、新裝置的運用,對于改善車輛的操縱性、穩定性、安全性和舒適性等都有重大意義。
(2)ABS的研究狀況及其發展前景
目前,車輛防抱制動控制系統(ABS)已發展成為成熟的產品,并在各種車輛上得到了廣泛的應用,但是這些產品基本都是基于車輪加、減速門限及參考滑移率方法設計的。方法雖然簡單實用,但是其調試比較困難,不同的車輛需要不同的匹配技術,在許多不同的道路上加以驗證;從理論上來說,整個控制過程車輪滑移率不是保持在最佳滑移率上,并未達到最佳的制動效果。
隨著現代電子技術的飛速發展,ABS 的核心部件ECU也在不斷地成熟,把多種功能電路集成于一塊芯片,越來越多的ABS 系統已經選用功能強、速度快、集成度高的16 位微處理器,提高了ECU 的處理速度、控制精度和可靠性,擴大了ABS 的控制范圍.但是ABS/ASR并不能解決汽車制動中的所有問題.因此由ABS/ASR 進一步發展演變成電子控制制動系統(EBS) ,它將是控制系統發展的一個重要的方向。EBS 系統比ABS 系統增加了各種傳感器,包括三維力傳感器、制動器摩擦片磨損傳感器等.該系統用電子控制取代機械傳動,減少制動系統機械傳動的滯后時,縮短制動距離。在低強度時,使摩擦片磨損最??;中等強度時,利用ABS 達到最佳的道路附著系數利用率;高強度時,施加最大的制動壓力,從而獲得最佳的控制制動力。
研究?jī)?nèi)容
① 熟悉ABS在制動過程中的工作原理;
② 對單輪模型進行分析并建立動力學模型;
③ 對輪胎進行分型并建立輪胎模型;
④ 對ABS的控制系統進行分析,確定控制方法;
⑤ 能夠熟練使用MATLAB/Simulink,搭建框圖并進行仿真。通過調整參數,對系統進行分析;
⑥ 比較不同控制系統方法下的ABS工作的穩定性與準確性。
擬采取的研究方法、技術路線、實驗方案及可行性分析
(1)實驗方案
對汽車制動系統進行動力學分析,建立動力學模型,列出相應的動力學方程。根據動力學方程,用MATLAB/Simulink,搭建框圖并進行仿真。通過調整參數,對系統進行分析,著重研究基于PID控制,開關控制。最后比較兩種控制系統下的穩定性、快速性和準確性。
(2)研究方法
① 分析有ABS和無ABS的情況下對系統的影響。
② 在不同的控制系統下,對同一個參數,分析對不同系統的影響,改變同一個參數,分析對ABS系統的影響。。
研究計劃及預期成果
研究計劃:
2012年11月12日-2012年12月2日:按照任務書要求查閱論文相關參考資料,填寫畢業設計開題報告書。
2012年12月3日-2013年1月20日:專業實訓。
2013年1月21日-2013年3月1日:畢業實習。
2013年3月2日-2010年3月8日:學習并翻譯一篇與畢業設計相關的英文材料。
2013年3月9日-2013年3月29日:ABS的動力學建模與分析。
2013年3月30日-2013年4月26日:用MATLAB/Simulink,搭建框圖并進行仿真。
2013年4月27日-2013年5月25日:畢業論文撰寫和修改工作。
預期成果:
通過對開關控制、PID控制等方法的研究對其進行進一步的了解和探索,將它們的最新成果應用于ABS系統,使其更加完善的工作于車輛中。。
特色或創新之處
① 使用MATLAB編程仿真,效果明顯,方便改變參量,能夠直觀判斷實驗結果。
② 采用固定某些參量、改變某些參量來研究問題的方法,思路清晰,簡潔明了,行之有效。
已具備的條件和尚需解決的問題
① 實驗方案思路已經非常明確,已經具備使用MATLAB編程仿真的能力和圖像處理方面的知識。
② 使用MATLAB編程的能力尚需加強。
指導教師意見
指導教師簽名:
年 月 日
教研室(學科組、研究所)意見
教研室主任簽名:
年 月 日
系意見
主管領導簽名:
年 月 日
英文原文
Brake systems
We all know that pushing down on the brake pedal slows a car to a stop. But how does this happen? How does your car transmit the force from your leg to its wheels? How does it multiply the force so that it is enough to stop something as big as a car?
When you depress your brake pedal, your car transmits the force from your foot to its brakes through a fluid. Since the actual brakes require a much greater force than you could apply with your leg, your car must also multiply the force of your foot. It does this in two ways:
· Mechanical advantage (leverage)
· Hydraulic force multiplication
The brakes transmit the force to the tires using friction, and the tires transmit that force to the road using friction also. Before we begin our discussion on the components of the brake system, we'll cover these three principles:
· Leverage
· Hydraulics
· Friction
Leverage and Hydraulics
In the figure below, a force F is being applied to the left end of the lever. The left end of the lever is twice as long (2X) as the right end (X). Therefore, on the right end of the lever a force of 2F is available, but it acts through half of the distance (Y) that the left end moves (2Y). Changing the relative lengths of the left and right ends of the lever changes the multipliers.
The basic idea behind any hydraulic system is very simple: Force applied at one point is transmitted to another point using an incompressible fluid, almost always an oil of some sort. Most brake systems also multiply the force in the process. Here you can see the simplest possible hydraulic system:
Your browser does not support JavaScript or it is disabled.
Simple hydraulic system
In the figure above, two pistons (shown in red) are fit into two glass cylinders filled with oil (shown in light blue) and connected to one another with an oil-filled pipe. If you apply a downward force to one piston (the left one, in this drawing), then the force is transmitted to the second piston through the oil in the pipe. Since oil is incompressible, the efficiency is very good -- almost all of the applied force appears at the second piston. The great thing about hydraulic systems is that the pipe connecting the two cylinders can be any length and shape, allowing it to snake through all sorts of things separating the two pistons. The pipe can also fork, so that one master cylinder can drive more than one slave cylinder if desired, as shown in here:
Your browser does not support JavaScript or it is disabled.
Master cylinder with two slaves
The other neat thing about a hydraulic system is that it makes force multiplication (or division) fairly easy. If you have read How a Block and Tackle Works or How Gear Ratios Work, then you know that trading force for distance is very common in mechanical systems. In a hydraulic system, all you have to do is change the size of one piston and cylinder relative to the other, as shown here:
Your browser does not support JavaScript or it is disabled.
Hydraulic multiplication
To determine the multiplication factor in the figure above, start by looking at the size of the pistons. Assume that the piston on the left is 2 inches (5.08 cm) in diameter (1-inch / 2.54 cm radius), while the piston on the right is 6 inches (15.24 cm) in diameter (3-inch / 7.62 cm radius). The area of the two pistons is Pi * r2. The area of the left piston is therefore 3.14, while the area of the piston on the right is 28.26. The piston on the right is nine times larger than the piston on the left. This means that any force applied to the left-hand piston will come out nine times greater on the right-hand piston. So, if you apply a 100-pound downward force to the left piston, a 900-pound upward force will appear on the right. The only catch is that you will have to depress the left piston 9 inches (22.86 cm) to raise the right piston 1 inch (2.54 cm).
A Simple Brake System
Before we get into all the parts of an actual car brake system, let's look at a simplified system:
Your browser does not support JavaScript or it is disabled.
A simple brake system
You can see that the distance from the pedal to the pivot is four times the distance from the cylinder to the pivot, so the force at the pedal will be increased by a factor of four before it is transmitted to the cylinder.
You can also see that the diameter of the brake cylinder is three times the diameter of the pedal cylinder. This further multiplies the force by nine. All together, this system increases the force of your foot by a factor of 36. If you put 10 pounds of force on the pedal, 360 pounds (162 kg) will be generated at the wheel squeezing the brake pads.
There are a couple of problems with this simple system. What if we have a leak? If it is a slow leak, eventually there will not be enough fluid left to fill the brake cylinder, and the brakes will not function. If it is a major leak, then the first time you apply the brakes all of the fluid will squirt out the leak and you will have complete brake failure.
Drum brakes work on the same principle as disc brakes: Shoes press against a spinning surface. In this system, that surface is called a drum.
Figure 1. Location of drum brakes.? See more drum brake pictures.
Many cars have drum brakes on the rear wheels and disc brakes on the front. Drum brakes have more parts than disc brakes and are harder to service, but they are less expensive to manufacture, and they easily incorporate an emergency brake mechanism.
In this edition of HowStuffWorks, we will learn exactly how a drum brake system works, examine the emergency brake setup and find out what kind of servicing drum brakes need.
Figure 2. Drum brake with drum in place
Figure 3. Drum brake without drum in place
Let's start with the basics.
The Drum Brake
The drum brake may look complicated, and it can be pretty intimidating when you open one up. Let's break it down and explain what each piece does.
Figure 4. Parts of a drum brake
Like the disc brake, the drum brake has two brake shoes and a piston. But the drum brake also has an adjuster mechanism, an emergency brake mechanism and lots of springs.
First, the basics: Figure 5 shows only the parts that provide stopping power.
Your browser does not support JavaScript or it is disabled.
Figure 5. Drum brake in operation
When you hit the brake pedal, the piston pushes the brake shoes against the drum. That's pretty straightforward, but why do we need all of those springs?
This is where it gets a little more complicated. Many drum brakes are self-actuating. Figure 5 shows that as the brake shoes contact the drum, there is a kind of wedging action, which has the effect of pressing the shoes into the drum with more force.
The extra braking force provided by the wedging action allows drum brakes to use a smaller piston than disc brakes. But, because of the wedging action, the shoes must be pulled away from the drum when the brakes are released. This is the reason for some of the springs. Other springs help hold the brake shoes in place and return the adjuster arm after it actuates.
Brake Adjuster
For the drum brakes to function correctly, the brake shoes must remain close to the drum without touching it. If they get too far away from the drum (as the shoes wear down, for instance), the piston will require more fluid to travel that distance, and your brake pedal will sink closer to the floor when you apply the brakes. This is why most drum brakes have an automatic adjuster.
Figure 6. Adjuster mechanism
Now let's add in the parts of the adjuster mechanism. The adjuster uses the self-actuation principle we discussed above.
Your browser does not support JavaScript or it is disabled.
Figure 7. Drum brake adjuster in operation
In Figure 7, you can see that as the pad wears down, more space will form between the shoe and the drum. Each time the car stops while in reverse, the shoe is pulled tight against the drum. When the gap gets big enough, the adjusting lever rocks enough to advance the adjuster gear by one tooth. The adjuster has threads on it, like a bolt, so that it unscrews a little bit when it turns, lengthening to fill in the gap. When the brake shoes wear a little more, the adjuster can advance again, so it always keeps the shoes close to the drum.
Some cars have an adjuster that is actuated when the emergency brake is applied. This type of adjuster can come out of adjustment if the emergency brake is not used for long periods of time. So if you have this type of adjuster, you should apply your emergency brake at least once a week.
Servicing
The most common service required for drum brakes is changing the brake shoes. Some drum brakes provide an inspection hole on the back side, where you can see how much material is left on the shoe. Brake shoes should be replaced when the friction material has worn down to within 1/32 inch (0.8 mm) of the rivets. If the friction material is bonded to the backing plate (no rivets), then the shoes should be replaced when they have only 1/16 inch (1.6 mm) of material left.
Photo courtesy of a local AutoZone store
Figure 9. Brake shoe
Just as in disc brakes, deep scores sometimes get worn into brake drums. If a worn-out brake shoe is used for too long, the rivets that hold the friction material to the backing can wear grooves into the drum. A badly scored drum can sometimes be repaired by refinishing. Where disc brakes have a minimum allowable thickness, drum brakes have a maximum allowable diameter. Since the contact surface is the inside of the drum, as you remove material from the drum brake the diameter gets bigger.
The current Bosch component Anti-lock Braking System (ABSⅡ), is a second generation design wildly used by European automakers such as BWM, Mercedes-Benz and Porsche. ABSⅡ system consists of : four wheel speed sensor, electronic control unit and modulator assembly.
A speed sensor is fitted at each wheel sends signals about wheel rotation to control unit. Each speed sensor consists of a sensor unit and a gear wheel. The front sensor mounts to the steering knuckle and its gear wheel is pressed onto the stub axle that rotates with the wheel. The rear sensor mounts the rear suspension member and its gear wheel is pressed onto the axle. The sensor itself is a winding with a magnetic core. The core creates a magnetic field around the winding, and as the teeth of the gear wheel move through this field, an alternating current is induced in the winding. The control unit monitors the rate o change in this frequency to determine impending brake lockup.
The control unit’s function can be divided into three parts: signal processing, logic and safety circuitry. The signal processing section is the converter that receives the alternating current signals form the speed sensors and converts them into digital form for the logic section. The logic section then analyzes the digitized signals to calculate any brake pressure changes needed. If impending lockup is sensed, the logic section sends commands to the modulator assembly.
The hydraulic modulator assembly regulates pressure to the wheel brakes when it receives commands from the control utuit. The modulator assembly can maintain or reduce pressure over the level it receives from the master cylinder, it also can never apply the brakes by itself. The modulator assembly consists of three high-speed electric solenoid valves, two fluid reservoirs and a turn delivery pump equipped with inlet and outlet check valves. The modulator electrical connector and controlling relays are concealed under a plastic cover of the assembly.
Each front wheel is served by electric solenoid valve modulated independently by the control unit. The rear brakes are served by a single solenoid valve and modulated together using the select-low principle. During anti-braking system operation, the control unit cycles the solenoid valves to either hold or release pressure the brake lines. When pressure is released from the brake lines during anti-braking operation, it is routed to a fluid reservoir. There is one reservoir for the front brake circuit. The reservoirs are low-pressure accumulators that store fluid under slight spring pressure until the return delivery pump can return the fluid through the brake lines to the master cylinder.
中文譯文
制動系統
眾所周知,踩下制動踏板可以使汽車減速至停止。但這是如何產生的呢?汽車是如何將力從你的腿傳遞到車輪的呢?汽車是如何將力放大到足夠大以致可以將像汽車一樣大的東西制動的呢?
制動系統組件
當你踩下制動踏板的時候,汽車通過液體把力從腳傳遞到制動器。因?yàn)橹苿?dòng)器需要的真正力量比你的腿能提供的要大的多,所以汽車必須放大腳產生的力
有兩種方式:
機械杠桿作用
液力放大
制動器通過摩擦把力傳遞給輪胎,并且輪胎也是通過摩擦把力傳遞給路面的。 在我們討論制動系統的組成之前,先來介紹以下三條原則:
杠桿
液力
摩擦力
杠桿和液力
在下面的圖中,一個力F加在杠桿的左端。左端的杠桿長度(2X)是右端(X)的兩倍。因此杠桿右端可施加的力為2F ,但是右端移動的距離(Y)是左端距離(2Y)的一半。改變杠桿的左端和右端的長度可以改變放大系數。
任何液壓系統背后的基本原理都是非常簡單的:作用在某一點力通過通常是油一類的不可壓縮的液體傳遞到另一點。大多數的制動系統也在這個過程中放大力。下面的是最簡單的液壓系統:
簡單液壓系統
在上圖中,兩個活塞放在兩個充滿油的玻璃液壓缸中并且由充滿油的管道相連。如果在一個活塞上施加一個向下的力,那么力將通過管道中的油傳遞到第二個活塞。因?yàn)橛鸵菏遣豢蓧嚎s的,所以傳遞效率很好,大部分的作用力都傳遞到了另一個活塞。
液壓系統的好處連接兩液壓缸的管道可以是任何長度和形狀,這樣就可以使管道彎曲的通過兩活塞之間的各種部件。管道也可以是分叉的,如果有需要的話,這樣一個主缸可以驅動數個副缸。如下圖所示:
帶有兩個副缸的主缸
液壓系統的另一個好處是產生放大(或者縮?。?力相當?shù)厝菀?。如果你一讀過滑車設備工作原理或者齒輪齒數比原理,那么你就會知道在機械系統中把力轉化為距離處理是很常見的。在液壓系統中,我們所要做的就是相對地改變一組活塞和液壓缸的尺寸。如下圖所示:
液壓增力原理
為了確定上圖中的放大因子,先由觀察活塞的尺寸開始。假設左邊活塞的直徑為2英尺(5.08cm而右邊的直徑為6英尺(15.24cm)。兩個活塞的面積是Pi * r2 。因此左面活塞的面積是3.14,而右面的面積是28.26。右面活塞的面積是左邊的九倍大。這就意味著無論在左面的活塞上施加多大的力,在右面的活塞上就會輸出九倍于左面的力。所以,如果在左邊活塞上施加100磅向下的力,那么在右面活塞上將產生900磅向上的力。唯一的補償是左面的活塞要移動9英尺(22.86cm)來使右面提升1英尺(2.54cm)
一個簡單的制動系統
在我們深入了解一個真實的制動系統的各部分之前,讓我們先來看一個簡化的系統:
我們可以看到踏板到樞軸的距離是液壓缸到樞軸距離的4倍,所以施加在踏板上的力在傳遞到液壓缸之前將被增加4倍。我們還可以看到制動缸的直徑是踏板缸直徑的3倍。這就將力進一步放大了九倍。最終這個系統將腿上的力增加了36倍。所以,如果在踏板上施加10磅的力,將在擠壓制動帶的輪上產生369磅(162kg)的力。
下面是這種簡單系統所存在的問題。要是系統有泄漏該怎么辦呢?如果是輕微泄漏,最終將會沒有足夠的油使制動缸充滿,并且制動器將停止工作。如果是嚴重泄漏,那么在你制動的第一時間,所有的油液將從泄露處噴射而出,并且制動系統將徹底地不起作用。
鼓式制動器的工作原理和盤式制動器是一樣的:制動面接觸一個磨砂的表面。在這個系統中,那個表面稱作制動鼓
圖1.制動鼓的位置
許多汽車的后輪安裝鼓式制動器,而盤式制動器安裝在前面。鼓式制動器比盤式制動器有更多的零件并且更難檢修。 但是制造成本相對便宜,還有鼓式制動器容易組裝一個緊急使用的制動裝置。
在本版本的How StuffWorks中,我們將詳盡了解鼓式制動系統是如何工作的??疾炀o急制動系統的組成,并且找到鼓式制動器需要何種檢修工作。
圖2. 有鼓的鼓式制動器
圖3.未安裝鼓的鼓式制動器
讓我們基礎開始:
鼓式制動器
鼓式制動器可能看起來比較復雜,它可以是很復雜的,當你打開一個的時候。讓我們拆開它,并解釋每一塊的作用。
圖4. 鼓式制動器的組成
如盤式制動器,鼓式制動器有兩個制動蹄和一個活塞。 But the drum brake also has an adjuster mechanism, an emergency brake mechanism and lots of springs .但是鼓式制動器也有一個調節機制,緊急剎車機制和大量的彈簧 。
首先,基礎知識: 圖5顯示只有部分提供的制動力。
圖5.工作狀態下的鼓式制動器
當你踩下剎車踏板時,活塞推動緊靠著鼓的制動蹄。 That's pretty straightforward, but why do we need all of those springs?這是很簡單的,但為什么我們需要所有這些彈簧呢?
這使它變的有點復雜許多鼓式制動器是自增力式的。圖5表明,當制動蹄與鼓相接觸的時候,兩者間有一個楔入運動,這起到了產生更多的力量將制動蹄向鼓擠壓。
由楔入運動提供的額外制動力使得鼓式制動器可以使用比盤式制動器更小的活塞。
但是由于這種楔入運動,在制動釋放的時候制動蹄必須從鼓拉離開。這是使用其中部分彈簧的原因。其它彈簧的作用是將制動蹄固定并且驅動調節臂返回。
制動調節器
為了使鼓式制動器正確的工作,制動蹄必須緊貼著鼓但是不碰到它。如果離鼓太遠的話,活塞將需要更多的油液以通過那段距離,并且當你制動時,制動踏板將下行而離地板更近。這就是為什么大多數的鼓式制動器有一個自動調節裝置的原因。
圖6.調節機構
現在讓我們?cè)诎颜{(diào)節機構也加進來,這個調節器使用的是上面討論過的自增力原理。
圖7.工作狀態下的鼓式制動調節器
在圖7中,我們可以看到由于摩擦片的磨損,這使得制動蹄和鼓之間形成更大的空間。每次車停下的時候,相反的是制動蹄被拉的和鼓更緊。當間隙變的足夠大時,調節杠桿足夠擺動推進調節齒輪先前轉動一個齒。調節裝置有一個行程,就像一個螺栓,以便當它轉動時旋開一點點,延長以填補間隙。當制動蹄進一步磨損,調節器又可以再向前。所以它總是保持制動蹄緊靠著鼓。
有些汽車緊急剎車時有一個被驅動的調節器。如果緊急制動很長一段時間沒有使用,這種類型的調節器可以產生調節作用。所以如果你有這種類型的調節器,你應該每周至少使用一次緊急制動裝置。
檢修
鼓式制動器最常見的檢修是更換制動蹄。一些鼓式制動器在背面設置了一個檢查孔,通過這個孔,你可以看到制動蹄上還剩余多少摩擦材料。當摩擦材料
磨損到鉚釘內1/32英寸(0.8mm)時,必須更換制動蹄。如果摩擦材料和墊板直接連接(無鉚釘),那么當摩擦材料只剩下1/16英寸(1.6mm)時,就該換制動蹄了。
圖9.制動蹄
正如在盤式制動器中,深的刻痕可能會磨穿到制動鼓。如果一個磨損的制動蹄使過長的時間,把摩擦片固定到墊板上鉚釘可以將制動鼓摸出一條凹槽。一個嚴重磨損的制動鼓有時可以被修補修復。盤式制動器有最小允許厚度,鼓式制動器有一個最大允許直徑。因?yàn)榻佑|表面是鼓的內側。當你將材料從制動器中取出時,制動鼓的直徑變大了。
防抱死制動系統除了上面基本操作,還有兩個特點。首先,當制動系統的壓力上升到使輪胎抱死或即將抱死的時候,防抱死制動系統才會啟動;當制動系統在正常情況下,防抱死制動系統停止運作。其次,如果防抱死制動系統有問題時,制動器會獨立地繼續運行。但控制板上的指示燈亮起提醒司機系統出現問題。
目前歐洲汽車生產商,如:寶馬、奔馳、寶時捷等廣泛使用的是波許(Bosch)防抱死制動系統。這種系統基本組成包括車輪轉速傳感器,電子控制裝置和調節裝置。
每個有一個向電子控制裝置發出車輪轉動情況的信號的傳感器,它一般由磁感應傳感頭和齒圈組成。前面的傳感器安在輪轂上,齒圈安在輪網上。后面的傳感器安在后部的監測系統上,齒圈安在輪軸上。傳感器本身是纏繞電磁核的電線圈,電磁核才線圈的周?chē)a(chǎn)生磁場。當齒圈的齒移動到磁場時,就會改變線圈的電流。電子控制裝置會監測這種變化,然后判斷車輪是否即將抱死。
電子控制裝置有三個作用,即:信號的處理,編輯和安全防護。信號的處理起到轉換器的作用,它是將接受的脈沖電信號處理轉換成數值,為編輯做準備。編輯就是分析這些數值,計算出需要制動壓力。如果檢測出車輪即將抱死,電控裝置就會計算出數值向調節裝置發出指令。
當接受到電子控制裝置的指令后,液壓執行裝置會調節制動輪缸的液壓的大小。調節裝置能保持或減小來自制動主缸的液壓,而裝置本身是不能啟用制動器的。這種裝置有三個高速率的電磁閥,兩個油液存儲器和一個帶有內外檢測閥的傳動泵。調節裝置中的電子連接器隱藏在塑料蓋下。
每個電磁閥都是其獨立控制的,并作用于前輪。后部的制動輪缸受到一個電磁閥控制,并依照------的原理進行調節。當防抱死制動系統運行時,電子控制裝置會使電磁閥循環運作,這樣既能收回又能釋放制動器的壓力。當壓力釋放時,它會釋放到液壓?jiǎn)卧G安康闹苿?dòng)器電路有一個單元。存儲器低壓存儲器,它在低壓下存儲油液,直到回流泵打開,油液流經制動輪缸進入制動主缸。
收藏