購買設計請充值后下載,,資源目錄下的文件所見即所得,都可以點開預覽,,資料完整,充值下載可得到資源目錄里的所有文件。。。【注】:dwg后綴為CAD圖紙,doc,docx為WORD文檔,原稿無水印,可編輯。。。具體請見文件預覽,有不明白之處,可咨詢QQ:12401814
Abstract
The program of this design is Φ the medicine bottle of 146.6 and the plastic pattern of its cap have design . The shape of medicine bottle is cavity big mouth little, if design , type core with ordinary injection mould will be hard slip away . May adopt though change type core, can but so make mould cost increase substantially, design difficulty just compare big.Therefore the mould of medicine bottle is blow type hollow blow mould mould, adopt inlay piece type structure, casting waterway cool , structure simple, durable, change parts easily, production efficiency is ring and mould high fairly.Mould from the fixed die board and board of movable mould , cut mouth inlay piece and mould base inlay piece, gaskets board as well as the etc.Parts of fixed head form . Cap may adopt general inject design together, but have thread because of its inside, do not be easy adopting force take off mould. therefore cap mould is two board type, adopt spin take off the injection mould of mould have . This mould automation level is mould high fairly, efficiency is high fairly. This mould from fixed die board, the board of movable mould, gripper shoe, gear axle, cylinder gear, cone gear, rack and such a series of component composition.
Keywords: the fixed die board board of movable mould inlay piece cool spin take off