購買設計請充值后下載,,資源目錄下的文件所見即所得,都可以點開預覽,,資料完整,充值下載可得到資源目錄里的所有文件。。?!咀ⅰ浚篸wg后綴為CAD圖紙,doc,docx為WORD文檔,原稿無水印,可編輯。。。具體請見文件預覽,有不明白之處,可咨詢QQ:12401814
畢業設計說明書(論文)
作 者:
學 號:
系:
專 業:
題 目:
曲軸銑端面打中心孔組合機床
及專用夾具設計
指導者:
(姓 名) (專業技術職務)
評閱者:
(姓 名) (專業技術職務)
2010 年 5 月
畢業設計說明書(論文)中文摘要
隨著機械制造業的不斷發展,社會對生產率的要求也越來越高。因此,大批量生產成為時代的需求,而組合機床就可以滿足這一需求,我們有必要來研究它。
本文中利用組合機床將銑端面和打中心孔在同一道工序中完成,這樣可以避免工件在加工不同工序時由于夾緊定位而產生的定位誤差。根據所擬定的組合機床的工藝和結構方案,可以定下夾具的結構形式和主要性能。夾具設計的要點是:確保夾具有足夠的剛度和強度,降低夾具的重心來提高夾具的穩定性;避免加工時發生振動;夾緊裝置有足夠的夾緊力和良好的自鎖性能;注意采用快速夾緊、聯動夾緊、氣動液壓夾緊裝置和機械化傳動裝置等。
關鍵詞 曲軸 銑端面 打中心孔 組合機床 專用夾具
畢業設計說明書(論文)外文摘要
Title Design of Combined Machined Tool and Special Fixture for Milling the End face and Punching the Central Hole on the Crankshaft
Abstract
With the continuous development of the machine manufacturing industry, the productivity of the community's increasing demands.Therefore, high volume production needs of the times, and the combination is enough to meet the needs of machine tool. We need to study it. In this paper,the use of combined machine tool can complete milling the end suferface and punching the central hole at the same procedure. This will avoid the workpiece in different processes arising positioning error as a result of clamping the positioning. According to the combined machined tool technology and the structure that have been studied out, and then the structure and the main properties can be set. The dist of fixture design: Ensure the fixture have sufficient stiffness and strength;Reduce the fixture's center of gravity to improve the stability of fixture. To avoid vibration when machining. Clamping device has sufficient clamping force and a good performance of the self-locking. Attention to the use of rapid clamping, clamping linkage,Hydraulic clamping devices and mechanical transmission devices etc.
Keywords Crankshaft End Suferface Milling Central Hole Punching Combined Machined Tool Special Fixture