東榮一礦1.5Mta新井設計【含CAD圖紙+文檔】,含CAD圖紙+文檔,東榮一礦,mta,設計,cad,圖紙,文檔 摘 要 本設計包括三個部分：一般設計部分、專題設計部分和翻譯部分。 一般部分為東榮一礦1.5 Mt/a的新井設計，東榮二礦位于黑龍江省集賢縣境內，交通十分便利。井田走向（東西）長平均約7.0 km，傾向（南北）長平均約4.0 km，井田水平面積為28.0 km2。主采煤層一層，即二槽煤層，平均傾角18.0°，厚約3.50 m。井田工業儲量為335.75 Mt，可采儲量238.67Mt，礦井服務年限為106 a。井田地質條件簡單。表土層平均厚度142 m；礦井正常涌水量為100 m3/h，最大涌水量為200 m3/h；煤層硬度系數f=2.3，煤質牌號為長焰煤；礦井相對瓦斯涌出量為2.73 m3/min，屬低瓦斯礦井；煤層無自然發火傾向，為易自燃煤層；煤塵有爆炸危險。 礦井采用雙立井單水平開拓，采煤方法為走向長壁采煤法。大巷采用帶式輸送機運煤，輔助運輸采用1 t固定箱式礦車。 設計首采區采用采區準備方式，工作面長度230 m，采用一次采全高采煤法，全部跨落法處理采空區。礦井采用“三八”制作業，兩班半生產，半班檢修。日進7個循環，循環進尺0.6 m，日產量4402.06 t。 礦井采用兩翼對角式通風。通風容易時期礦井總需風量3324 m3/min，礦井通風總阻力 693.3Pa，風阻0.226 N·s2/m8，等積孔2.50 m2，礦井通風容易。礦井通風困難時期礦井總風量3324 m3/min，礦井通風總阻力1396.3 Pa，風阻0.459 N·s2/m8，等積孔1.76 m2，礦井通風中等困難。設計礦井的噸煤成本120.08 元/t。 專題部分題目是回采巷道復合頂板破壞機理與支護技術。 翻譯部分是采礦活動誘發微震。 英文原文題目為：Triggering of Seismicity Remote from Active Mining Excavations 關鍵詞：立井；上下山開采；采區；傾斜長壁采煤法；兩翼對角式 ABSTRACT This design can be divided into three sections: general design, monographic study and translation of an academic paper. The general design is about a 1.5 Mt/a new underground mine design of dongrong coal mine. dongrong coal mine lies in jixian heilongjiang. the traffic is very convenient. It’s about 7.0 km on the strike and 4.0 km on the dip,with the 28.0 km2 total horizontal area. The minable coal seam of this mine is only one with an average thickness of 3.50 m and an average dip of 18.0°. The proved reserves of this coal mine are 335.75 Mt and the minable reserves are 238.67 Mt, with a mine life of 106 a.The geological condition of the mine is relatively simple. The normal mine inflow is 100 m3/h and the maximum mine inflow is 200 m3/h. It is anthracite coal spontaneous combustion tendency, and it’s a coal that has dust explosion. This mine adopts opening up by adits with one mining level. The adopted coal winning method is longwall mining to the dip or to the rise. Main roadway makes use of belt conveyor to transport coal resource, and mine car to be assistant transport. Designed first mining district makes use of the method of preparation in mining area, the length of working face is 230 m, which uses fully-mechanized coal mining technology, and fully caving method to deal with goaf. The working system is “three-eight”,with two and half teams mining, and the other overhauling. Every mining team makes three working cycle, with seven working cycle everyday. Advance of working cycle is 0.6 m, and quantity of 4402.06 ton coal is makedeveryday. The mine makes use of diagonal ventilation method. At the easy time of mine ventilation, the total air quantity is 3324 m3 per minute, the total mine ventilation resistance is 693.3 Pa, the coefficient of resistance is 0.226 N·s2/m8, equivalent orifice is 2.50 m2. At the difficult time of mine ventilation, the total air quantity is about 3324 m3 per minute, the total mine ventilation resistance is 1396.3 Pa, the coefficient of resistance is 0.459 N·s2/m8, equivalent orifice is 1.76 m2. The cost of the designed mine is 120.08 yuan per ton. The monographic study is deformation and failure mechanism and roof timbering technique study on roadway of composite roof. The translated academic paper is about implications for stress measurement programs and numerical stability analysis of faults in mines. Its title is that triggering of Seismicity Remote from Active Mining Excavations Keywords：opening up by adits; up-dip and down-dip minging; strip district ; longwall mining to the dip or to the rise; diagonal ventilation 1