工藝夾具-柴油機機體機械加工工藝及其Φ66鏜孔夾具設計,工藝,夾具,柴油機,機體,機械,加工,及其,66,鏜孔,設計 摘 要 本設計的內容包括了柴油機機體的機械加工工藝過程及其中工序的夾具設計。 本設計中加工工序內容主要有銑端面、鏜孔和鉆孔等。 在制定工藝過程中，要確定各工序的安裝工位和該工序需要的工步, 加工各工序的機車及機床的進給量、主軸轉速、切削速度和切削工時。然后進行鏜孔夾具設計,首先應考慮工件的定位與夾緊。選擇合適的定位元件和夾緊元件可以節約工時、提高工作效率。其次是引導裝置。在選擇元件時,應該盡量選擇標準件。最后計算該工序的基本時間、輔助時間和工作地服務時間。 關鍵詞 工序、定位、夾緊、夾具設計 ABSTRACT This design content has included the diesel engine organismmachine-finishing technological process and its center the workingprocedure jig design. In this design processes the working procedurecontent mainly to have the mill end surface, boring and the drill hole and so on. In the formulation technological process, must determine various working procedures the installment location and this workingprocedure need the labor step, processes various working procedures the locomotive and engine bed entering for the quantity, the main axleotational speed, the cutting speed and the cutting man-hour. Then carries on boring the jig design, first should consider the work piece the localization with clamps. Chooses the appropriate localization part and clamps the part to be allowed to save man-hour, the enhancement working efficiency. Next is the guiding arrangement. When chooses the part, should choose the standard letter as far as possible. Last count this working procedure basic time, non-cutting time and job site service time. Keywords： The process, The localization, clamps, jig design II