壓縮包內含有CAD圖紙和說明書,均可直接下載獲得文件，所見所得，電腦查看更方便。Q 197216396 或 11970985
畢業論文任務書
任務下達日期： 20**年2月28 日
畢業論文日期： 20**年3月07日至20**年6月10日
畢業論文題目：支撐掩護式液壓支架設計
畢業論文主要內容和要求：
主要內容：
1、液壓支架的原理、發展等；
2、根據圍巖性質、煤層賦存條件、初選配套設備的相關尺寸，確定支架基本架型及支架結構；液壓支架的基本參數確定及其尺寸計算。
3、對頂梁、底座、掩護梁、立柱、前后連桿等主要結構進行設計，并對其進行受力分析和強度校核。
基本要求：
工作阻力5600KN，最小高度2.5m，最大高度4.7，中心距1.5。完成主要部件、組件及主要零件工作圖的設計，編寫完成整機設計計算說明；設計圖紙量折合成A0圖紙不少于3張，并完成設計說明書，要有英文相關文章的翻譯，翻譯成中文后不少于3000字。
院長簽字： 指導教師簽字：
英文原文
One Realization Method for Remote Control of Hydraulic Support of the Electro-hydraulic in Coal Mine Face
Abstract—The remote control part of the system can set parameters such as operating mode and so on, while real-time recording and displaying running state of hydraulic supports, preserving historical data. It gathers control, data recording, data query and intelligence analysis as a whole, communicating with underground with RS485 and CANBUS communication interface functions, through PROFIBUS, MODBUS, CANBUS and other real-time protocols, in order to achieve continuous data acquisition and control, namely, to achieve unattended automatic operation, so that unmanned in the major coal production links to attain truly safe production.
I. Introduction
Since the inception of mechanized mining technology, all electro-hydraulic control system of hydraulic supports depend on imports. But the high cost and price, long supply cycle, technological security, untimely service, unopened agreement severely restrict the development of China's coal industry, and even become into bottleneck problems of the developing highintensive production to achieve unmanned exploration despite its excellent performance and technical support in enhancing the country's coal production and efficiency. And coal is the main body of China's primary energy, accounting for 70% of total energy. "National Plan for long-term scientific and technological development" explicitly pointed out that "we should vigorously develop coal clean, efficient, safe mining and utilization technologies, and strive to reach the international advanced level." Around this development strategy, "intensive and efficient coal mining equipment and technology, automation and intelligent technology of coal production, coal mine safety production technology" has become a priority theme of development in China, and coal integrated mechanization and automation technology are the key link to achieve safe and efficient coal mining, while the hydraulic supports electro-hydraulic automatic control system is an important part of the link.
Hydraulic supports electro-hydraulic control system is a distributed control system. There are these hydraulic support electro-hydraulic control system: DBT's PM4, MARCO company's PM31 and JOY's RS20-type and so on. The first fully mechanized caving hydraulic supports electro-hydraulic control system designed by the Coal Science Research Institute (Heaven and Earth Science and Technology Co., Ltd.) and the German Make has been running in Yanzhou Coal Mine. The system represents latest development level of the current electro-hydraulic control system, but the process of localization has not been yet completed.
To this end, research for hydraulic supports electrohydraulic automatic control system with independent intellectual property has not only of great practical significance, but also has far-reaching historical significance.
Hydraulic supports electro-hydraulic automatic control system is one network monitoring and control system with local control, LAN control and remote control , including ground control system, central control system, frame controller, network communication systems and power supply. The method resolves the ground control issues of hydraulic supports electro-hydraulic control system, which is remotecontrolled part and the master part of unmanned watching mining.
This template, modified in MS Word 2003 and saved as “Word 97-2003 & 6.0/95 – RTF” for the PC, provides authors with most of the formatting specifications needed for preparing electronic versions of their papers. All standard paper components have been specified for three reasons:
(1) ease of use when formatting individual papers,
(2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products, and
(3) conformity of style throughout a conference proceedings. Margins, column widths, line spacing, and type styles are builtin; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example.
Some components, such as multileveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. The formatter will need to create these components, incorporating the applicable criteria that follow.
II. CONTENT DESCRIPTIONII
Implementation platform of this method is PowerBuilder. It can connect with any database, and has very strong applicability. Because of its powerful Data Window, adding a flexible SQL statements it provides a great deal of flexibility data processing. In the PowerBuilder development environment, user interface design really achieve a "WYSIWYG", allowing programmers quickly to design their preferred interface in the interface design. Its rich graphical interface makes programming results even more icing on the cake. It’s unique characteristics of database management and friendly interface features with other external things, can widely use resources of other aspects, such as the tripartite control, etc.This system has used external things such as serial communication, OLE, OLE Database Blob features, and achieved serial communication functions with protocols such as MODBUS, PROFIBUS, and CANBUS, and completed the tasks of database dynamic storage, display graphics. In particular, it’s data pipeline makes data transmission from different databases on the Internet unique, data sharing between different database convenient, interfaces with other systems easily.
A The remote transmission method for hydraulic support control parameters and operating commands
This method can remoelysend a hydraulic support control parameters, control commands and operational commands, datasend from IPC to the end controller. Then the end controller will collate the data and pass to each controller's serial port in master-slave mode such as Figure 1.
There is the interface for sending long control parameters and operating commands. To send control parameters, first, type control parameters into the single editor and click "Parameter Send" with the mouse. To send operation commands, we must first specify the acting support frame, and then click the keyboard in the below right-half plane to select the function for support frame to complete, finally click "Operation Send". After receiving orders to send, the system must first change control parameters or operation commands red in character into the integer, because communications conduct crc checksum, and there is not XOR function in PowerBuilder. The changed integer are translated into binary code, and XOR function is achieved using binary characters to complete the crc checksum procedure. The implementation procedures are as follows:
data1="1010000000000001"http://a001H
crc1="1111111111111111"http://FFFFH
for l=1 to i
sj1=sj[l]
crc11=right(crc1,8)
b1=""
for k=8 to 1 step -1
crc111=Mid(crc11,k,1)
sj11=Mid(sj1,k,1)
if crc111=sj11 then
b1="0"+b1
else
b1="1"+b1
end if
next
crc1=left(crc1,8)+b1// Differences with the first L items of
// data or results
for k=1 to 8
crc11="0"+left(crc1,15)// Shift to the right one
crc111=right(crc1,1)// Shifted to the right out of a
crc1=crc11
if crc111="0" then
else
b1=""
for bb=16 to 1 step -1
crc111=Mid(crc1,bb,1)
sj11=Mid(data1,bb,1)
if crc111=sj11 then
b1="0"+b1
else
b1="1"+b1
end if
next
crc1=b1
end if
next
next
i=i+1
sj[i]=right(crc1,8)
i=i+1
sj[i]=left(crc1,8)
Where, i is the number to send the data, the last two sj [i] (left (crc1, 8), right (crc1, 8)) shall be the 16 bit checksum. And then the serial port would be started to complete serial communication with protocols such as MODBUS, PROFIBUS, and CANBUS. First, initialize the serial port:
ole_1.object.commport=1 //
ole_1.object.settings="9600,N,8,1"
ole_1.object.inputlen=1
ole_1.object.inputmode=1
ole_1.object.portopen=true
Second, the address, command, the register read address, the register read number, verification codes in hexadecimal form are all sent out. Because there is no hexadecimal number representation in PowerBuilder, this system changes data into binary through transformation between the decimal and character, and then writes them to the serial port in the form of large binary text variables (blob). Realize combination of: b_mode = b_mode + blob (CHAR (nn [i])), using the variablesof blob type. when data sent is zero, b_mode = b_mode + b_00. Thus ole_1.Object.Output = b_mode successfully sent data to the serial port. Third, after the end controller receives the commands, it sends the instruction down to the corresponding hydraulic supports to make them complete the required functions on the one hand, and the other hand, it returns response messages notifying the IPC that it has received the command. Fourth, when the data dd is red from the serial port, it will be transformed into a form appropriate for arithmetic calculations by (asc (dd)).
B. the implementation method for real-time condition monitoring of hydraulic supports in working face
In practice, the number of hydraulic support needed varies with the working face in mining coal, generally between 130 to 200, so it will be transmitted to end controller and the hydraulic support controllers as a controller parameter before work of mining. The real-time monitoring main interface for hydraulic supports in the working face is shown as Figure 2, in which, all the small long box frame mean hydraulic supports.
The program automatically determine theirs location and width, and assign ordinal number to them according to the screen width and the number of. The number of the small long box frame is n times of the number of hydraulic supports; n is the number of information kinds reflecting the states of hydraulic supports. As the number of hydraulic supports and information is very large, there are 600 long-boxs or more in the interface. So it is impossible to program the script one by one, and also the setting. And the macro substitution must be used. Since PowerBuilder can not achieve macro substitution, the system successfully realize the macro substitution by identifying in turn RichTextEdit controls combined with the window function. The script is as follows:
Environment my＿syrteem
Int li＿ScreenWidth, li＿ScreenWidth GetEnvironment(my＿syrteem)// Get the total width and length of the screen
li＿ScreenWidth = PixelstoUnits ( my＿syrteem. ScreenWidth, XPixelstoUnits!)
li＿ScreenHeight = PixelstoUnits (my＿syrteem. ScreenHeight, XPixelstoUnits!)
this.Move((li＿ScreenWidth-this.Width)/2,(li＿ScreenHeight -
this.Height - 600)/2 )
ss=integer((w＿jc1t2.Width)/(zjs1+1))
s1=rte_1.x
s2=rte_201.x
s3=rte_401.x
integer li_count,sss1
integer li_i,sr1,sr2
li＿count = upperbound(parent.control[])//Access to window
//controls the number of in vivo
richtextedit sr,srr,srr1,srr2,srr3// Statement richtextedit text
//object, used to access the window controls in vivo
FOR li_i = 1 TO li_count
CHOOSE CASE parent.control[li_i].typeof()
//parentBehalf of Form
case richtextedit!// If the control is richtextedit text
sr=parent.control[li_i]// Get the control reference
sss1=8
sr.width=ss-sss1
sr1=len(parent.control[li_i].classname())
sr1=sr1-4
sr2=integer(mid(parent.control[li_i].classname(),5 ,sr1))
if sr2<=200 then
sr.tag=string(sr2)
if sr2>(zjs1 +1 )then
sr.visible=false
end if
sr.x = s1+ss*(sr2 - 1)
else
if sr2>200 and sr2<=400 then
sr.tag=string(sr2 - 200)
if sr2>(zjs1+201) then
sr.visible=false
end if
sr.x = s1+ss*(sr2 - 200 - 1)
else
if sr2>400 and sr2<=600 then
sr.tag=string(sr2 - 400)
if sr2>(zjs1+401) then
sr.visible=false
end if
sr.x = s1+ss*(sr2 - 400 - 1)
end if
end if
end if
end CHOOSE
next
In the interface there are PowerBuilder's RichTextEdit controls(small long box frame) expressing hydraulic support, which has getfocus and mousemove events. When the mouse points to the small box, mouse event of pointed RichTextEdit control happens, showing hydraulic support number. If you want to understand the detailed running states of a hydraulic support, you can click this small long box frame, a window with tables, graphs and curves and other forms of information will pop up to display this bracket operation. There are threelines of small box in the interface, the first line of which show locality of the Shearer, the graphics expressing Shearer automatically moving to the position of the small box changing red; the second line show overrun state of Shearer, the small box becoming red; the third line show the STOP state of Shearer, the small box flashing red and yellow.
The system can real-time monitor and long-term record the analog such as inferior vena pressure, stroke length and end length, as well as digital such as 1 grade care help, 2 grade care help, emergency stop, spray, the location of Shearer.
III. CONCLUSION
The system can display and reflect the running status of hydraulic supports with curves, histograms and pie charts, set control, data recording, data query and intelligence analysis as a whole, have a higher intelligence level. It is a kind of effective method for the long-range electro-hydraulic control for hydraulic support in the coal mine working face, At present it have been put into trial operation.
REFERENCES
[1] Sun Han fang, Xu Aiqing ,“Principle and application of MCS-51/96 serials SCM (Revision), ” Beijing Aviation University Publisher.
[2] Wang Rong, ect.,“Detailed explanations for Power Builder application and developed technology,” Electron Industry Publisher
[3] Fan Linan ect.,“SQL Server 2000 Practical Tutorial,” Tsinghua University Press, 2004,2
[4] SongLei, ect., “One hundred practical Programming examples with PowerBuilder10, ” Tsinghua University Press, 2005,9
[5] Liu Zhiming, ect., “Database development key technologies and application examples of PowerBuilder, ” Posts & Telecom Press, 2004,5
[6] SunXing,“Serial Communication Technology Application in PowerBuilder,” Datbase Microwave Radio and Television Station，F(xiàn)riend of Science Amateurs, 2009,6
[7] Xiang Yu, “Research of Using MSComm Control to Communicate in PowerBuilder, ” Engineering Technology, 2008,7
中文譯文
回采工作面上遠程控制電液壓支架的實現方法
摘 要 遠程控制系統的一部分可以設置參數,比如操作模式等,而實時記錄和顯示運行狀態,保存了液壓支架的資料。它集中控制、數據錄入、數據查詢和情報分析作為一個整體,溝通與地下采用RS485通信接口功能和CANBUS,通過PROFIBUS、協議、CANBUS其它實時協議,以實現持續的數據采集和控制,即實現無人值守自動操作,使無人在主要的煤炭生產環節達到真正的安全生產。
1． 介紹
自機械化開采技術創建以來，所有電液壓支架的控制系統都依賴進口。盡管在提高中國的煤產量和效率方面，其有優異的性能和技術支持，但是成本高、周期長、價格,供應服務,技術安全協議,不合時宜的保質期嚴重地制約了我國煤炭產業發展,甚至成為發展高度集約化生產以實現無人駕駛的探索的瓶頸問題。而煤炭是中國的主體的主要能源,占總能量的70%?！皣议L期科學和技術發展計劃”明確指出,“我們應該大力發展煤的潔凈、高效、安全地挖掘和利用技術,力爭達到國際先進水平?！痹谥袊?，圍繞這些發展戰略“集約化和高效的煤礦設備和技術、自動化和智能化技術的煤炭生產、煤礦安全生產技術”已成為發展的最重要的主題,而且煤炭綜合機械化和自動化技術是達到安全、高效的煤礦的關鍵環節,,而液壓支架的電液自動控制系統是該連接的重要組成部分。
液壓支架電液控制系統是一個分布式控制系統。液壓支架的電液控制系統有這些: DBT's PM4，MARCO company's PM31和JOY's RS20-type等等。由煤炭科學研究院(天堂和地球科學與科技有限公司)和德國人設計的第一根完全綜采放頂煤液壓支架的電液控制系統已經在兗州煤礦運行。該系統代表了當前電液控制系統的最新發展水平,但是這一過程還尚未完成。
為此,研究具有自主知識產權的液壓支架電液自動控制系統不僅有重要的現實意義,而且具有深遠的歷史意義。
液壓支架電液自動控制系統是一個網絡監控系統與當?shù)氐目刂?、局域網(LAN)控制和遠程控制,包括地面控制系統、中央控制系統、框架、網絡通訊系統的控制器和電源供應器。該方法解決了液壓支架電液控制系統的遠程控制和主要控制部分的地面非人工勘察挖掘控制問題。無人在這個,采用改進的2003年和挽救了MS Word和6.0/95”字97-2003 - RTF”為PC的模板,為作者提供了大部分的電子版本的論文的規格。所有標準論文的組成部分被規定為三個原因:
(1)個人論文時使用方便的格式,
(2)自動符合促進并行或后期生產電子產品的電子要求,
(3)在一個會議論文集的風格整合上。內部風格類型的例子在這個文件提供和確認以斜體顯示類型在括號,利潤,柱之間的間距,寬度,和類型,證明了典范。
II.內容描述
該方法的實施平臺是PowerBuilder。它可連接任何的數據庫,并有很強的適用性。由于其強大的數據窗口,更增添了一種靈活的SQL語句,通過贊助支持國家“十一五”計劃(2007BAK29B0-5)和進行數據處理陜西科技重點攻關項目公司的蘇姍·戴衛斯(2006031153-01)，它提供了大量的靈活性設計。他們在優先考慮界面的界面設計。其豐富的圖形接口使編程的結果更錦上添花的蛋糕。它獨特的特征和數據庫管理的友好的界面特征,可以與其他外在的一切事物廣泛使用資源的其他方面,比如三方控制系統等組成。該系統具有使用外在的一切事物,如串行溝通,奧立,索爾斯克亞的特點,并對數據庫的斑點實現串行通信協議等功能作為紡織、PROFIBUS和CANBUS,完成了任務的動態存儲、顯示圖形數據庫。在尤為重要的是,它使得數據傳輸?shù)臄?shù)據從管道在互聯網上不同的數據庫之間的數據共享獨特,不同的數據庫方便,接口與其他系統很容易。
答:遠程傳輸方法,液壓支架控制參數和運行的命令該方法可以遠程發送一個液壓支架控制參數、控制命令和工作指令、數據發自IPC到底控制器。然后后,是后期控制器將整理數據并通過每個控制器的串行端口。主從模式如圖1。
有界面發送長長的控制參數和運行的命令。發送控制參數,首先,類型控制參數為簡單的單編輯器和點擊“參數發送”用鼠標。發送操作命令,我們首先必須指定代理支持框架,以及然后點擊鍵盤在以下right-half去選擇支撐結構的功能,最后點擊完成“操作發送”。接到命令送,系統首先要改變控制參數和運行的命令紅色的角色轉換到整數,因?yàn)橥ㄓ嵾M(jìn)行循環冗余檢查,沒有XOR函數文件等。變化了的整數轉化為二進制和XOR函數代碼,就要用到的二進制字符完整的循環冗余檢查程序。
data1="1010000000000001"http://a001H
crc1="1111111111111111"http://FFFFH
for l=1 to i
sj1=sj[l]
crc11=right(crc1,8)
b1=""
for k=8 to 1 step -1
crc111=Mid(crc11,k,1)
sj11=Mid(sj1,k,1)
if crc111=sj11 then
b1="0"+b1
else
b1="1"+b1
end if
next
crc1=left(crc1,8)+b1// Differences with the first L items of
// data or results
for k=1 to 8
crc11="0"+left(crc1,15)// Shift to the right one
crc111=right(crc1,1)// Shifted to the right out of a
crc1=crc11
if crc111="0" then
else
b1=""
for bb=16 to 1 step -1
crc111=Mid(crc1,bb,1)
sj11=Mid(data1,bb,1)
if crc111=sj11 then
b1="0"+b1
else
b1="1"+b1
end if
next
crc1=b1
end if
next
next
i=i+1
sj[i]=right(crc1,8)
i=i+1
sj[i]=left(crc1,8)
從串行端口,然后會開始完整連貫良好的協調和溝通。首先,初始化一個串行端口:
ole_1.object.commport=1 //
ole_1.object.settings="9600,N,8,1"
ole_1.object.inputlen=1
ole_1.object.inputmode=1
ole_1.object.portopen=true
二、地址、指揮、寄存器的地址、閱讀登記號碼,驗證代碼閱讀的十六進制的形式都發出去。因?yàn)闆]有十六進制數表示,這一制度的變化在文件數據通過變換關系的二進制小數與他們的性格,并編寫的串口的形式大二進制文本變量(斑)。實現組合的:
b_mode = b_mode +blob(CHAR(nn [i]) 利用變量發送數據時的是零,b_mode = b_mode +b_00。 因此ole_1.Object.Output = b_mode成功發送數據到串行端口。第三,結束后的控制器接收它發出了命令,指令下到相應的液壓支架使他們完成要求的功能,另一方面,另一方面返回響應消息通知IPC收到命令。第四,當數據從dd是紅色的從串行端口,它將會被轉換成一種合適的進行算術計算,通過(asc(dd))。
B為即時條件下的實現方法監測液壓支撐于工作面。
在實踐中,液壓支架所需的數量也各不相同，在與工作面的開采煤炭,一般之間130分到200,所以它將被傳送給控制器和結束，液壓支架控制器作為控制器參數之前工作的挖掘。主要接口進行實時監控液壓支架工作面的表現為圖2。
程式會自動確定他們的位置和寬度,并指派序數性,他們按照屏幕寬度和數目。小的數目長盒子框架是n次的液壓支架的數量;n是大量的信息種類反映美國的液壓支架。隨著數量的液壓支架和信息是非常大的,有600 long-boxs甚至更多接口。自從不一定能達到宏帶入文件,
Environment my＿syrteem
Int li＿ScreenWidth, li＿ScreenWidth GetEnvironment(my＿syrteem)// Get the total width and length of the screen
li＿ScreenWidth = PixelstoUnits ( my＿syrteem. ScreenWidth, XPixelstoUnits!)
li＿ScreenHeight = PixelstoUnits (my＿syrteem. ScreenHeight, XPixelstoUnits!)
this.Move((li＿ScreenWidth-this.Width)/2,(li＿ScreenHeight -
this.Height - 600)/2 )
ss=integer((w＿jc1t2.Width)/(zjs1+1))
s1=rte_1.x
s2=rte_201.x
s3=rte_401.x
integer li_count,sss1
integer li_i,sr1,sr2
li＿count = upperbound(parent.control[])//Access to window
//controls the number of in vivo
richtextedit sr,srr,srr1,srr2,srr3// Statement richtextedit text
//object, used to access the window controls in vivo
FOR li_i = 1 TO li_count
CHOOSE CASE parent.control[li_i].typeof()
//parentBehalf of Form
case richtextedit!// If the control is richtextedit text
sr=parent.control[li_i]// Get the control reference
sss1=8
sr.width=ss-sss1
sr1=len(parent.control[li_i].classname())
sr1=sr1-4
sr2=integer(mid(parent.control[li_i].classname(),5 ,sr1))
if sr2<=200 then
sr.tag=string(sr2)
if sr2>(zjs1 +1 )then
sr.visible=false
end if
sr.x = s1+ss*(sr2 - 1)
else
if sr2>200 and sr2<=400 then
sr.tag=string(sr2 - 200)
if sr2>(zjs1+201) then
sr.visible=false
end if
sr.x = s1+ss*(sr2 - 200 - 1)
else