購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖，doc,docx為WORD文檔，有不明白之處，可咨詢QQ:1304139763
河 南 機 電 高 等 專 科 學 校 畢 業 設 計 說 明 書 1 摘 要 本設計題目為 型彎曲模設計 體現了典型 型彎曲模的設計要求 內容 及方向 有一定的設計意義 通過對該零件模具的設計 進一步加強了設計者彎 曲模設計的基礎知識 為設計更復雜的彎曲模具做好了鋪墊和吸取了更深刻的經 驗 本設計運用彎曲成型工藝及模具設計的基礎知識 首先分析了板材的性能要 求 為選取模具的類型做好了準備 然后計算了彎曲件的彎曲力 便于選取壓力 機噸位及確定壓力機型號 最后分析了彎曲件的特征 確定模具的設計參數 設 計要點及頂出裝置的選取 本設計采用了八字?jǐn)[塊復合模成型 型件 復合模具有生產效率高 制件精 度高等特點 特別適合大批量高精度生產 成型原理可劃分為兩個階段 首先 凸模與凹模共同作用成型 U 形件 凹模繼續下行 迫使擺塊左右擺動動作 U 型 件被再次彎曲成型 最后成型 型件 這種機構動作靈活可靠 設計方便 非 常適合在本副模具中使用 關鍵詞 彎曲模 凸模 凹模 擺塊 河 南 機 電 高 等 專 科 學 校 畢 業 設 計 說 明 書 2 Abstract The requirement content and direction of the design of the bending dies parts are embodied on this bending dies design The designer s foundation knowledge of the bending dies design is reinforced and is able to design more complex injection mould through the design Through the foundation knowledge firstly the composion and the performance of the flat sheet is analyzed to choose the type of the mould Secondly the volume of the bend is estimated to choose the press molding machine and to detemine the type press machine and tonnage of press Lastly the character of the part is analyzed to determine the mould design parameter and design point and choose the ejection assembly Swing block compound die is used in this design to form the part the compound die can produce pierced blanks to close flatness and dimensional tolerances Compound die sproduce efficiency and part precision is hight Especially fit for volume produce and hight precision produce Moulding of the part is like this Fist behing punch and die s together operation the part is form to the fast bending die is going down swing block is flogged to work and the second bending is begin At last the part is form to part This device s action credibly and design conveniencly So it is adapted to be used on this mould extraordinarily Keywords bending dies punch dieg swing block